JVC RX-7000RBK manual Surround modes, DVD Multi Playback Mode

Page 29
DOLBY SURROUND
D I G I T A L
DOLBY SURROUND

Surround modes

With this receiver, you can use four types of the Surround mode.

Following modes cannot be used when only the front speakers are connected to this receiver (without the rear speakers or center speaker).

Dolby Surround (Dolby Digital and Dolby Pro Logic) *

Used to watch the soundtracks of software encoded with Dolby

Digital (bearing the mark ) or with Dolby Surround

(bearing the mark ).

Dolby Surround encoding format records the left front channel, right front channel, center channel, and rear channel (total 4 channels) signals into 2 channels. The Dolby Pro Logic decoder built in this receiver decode these 2 channel signals into original 4 channel signals — matrix-based multichannel reproduction, and allows you to enjoy the realistic stereo sounds in your listening room.

On the other hand, Dolby Digital encoding method (so called a discrete 5.1 channel digital audio format) records and compresses the left front channel, right front channel, center channel, left rear channel, right rear channel, and LFE channel (total 6 channels, but LFE channel is counted as 0.1 channel, therefore called 5.1 channels) signals digitally. Each channel is completely independent from other channel signals to avoid interference, therefore, you can obtain much better sound quality with much stereo and surround effects.

The Dolby Digital decoder built in this receiver can create much more realistic sound field in your listening room. You may feel as if you were in a real theater.

In addition, Dolby Digital enables stereo rear sounds, and sets the cutoff frequency of the rear treble at 20 kHz, comparing to 7 kHz for Dolby Pro Logic. These facts enhance the sound movement and being-there feelings much more than Dolby Pro Logic.

•To enjoy the software encoded with Dolby Digital, you must connect the source component using the digital terminal on the rear of this receiver. (See page 8.)

DTS Digital Surround **

DTS Digital Surround is another discrete 5.1 channel digital audio format available on CD, LD, and DVD software.

Comparing to Dolby Digital, audio compression rate is relatively low. This fact allows DTS Digital Surround format to have more data recorded than Dolby Digital even using the same media, and to add breadth and depth to the reproduced sounds. As a result, DTS Digital Surround features natural, solid and clear sound.

•To enjoy the software encoded with DTS Digital Surround, you must connect the source component using the digital terminal on the rear of this receiver. (See page 8.)

MPEG Multichannel

MPEG Multichannel is another discrete 5.1 channel digital audio format available on DVD software, and uses encoding method called MPEG2-Audio. (MPEG stands for “Motion Picture Expert Group” and has been originally developed for compressing video signals.) To watch the soundtracks of video software bearing the mark

, the receiver can provide you with MPEG Multichannel decoder.

MPEG Multichannel is automatically selected according to software played back and the speaker arrangement you have done.

•To enjoy the software encoded with MPEG Multichannel, you must connect the source component using the digital terminal on the rear of this receiver. (See page 8.)

JVC Theater Surround

In order to reproduce a more realistic sound field in your listening room while playing soundtracks of software encoded with Dolby

Surround (bearing the mark ) you can use JVC Theater Surround.

Notes:

•The DSP modes have no effect on monaural sources.

•When you select “DVD MULTI” as the source to play, you cannot select or adjust the DSP modes.

•The ÙPRO LOGIC indicator lights up when the Dolby Pro Logic decoder built in this receiver is activated.

DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete 5.1 channel output mode of the DVD player or other equipment.

You can adjust the DVD MULTI playback mode while playing back a video software such as a DVD using the analog discrete 5.1 channel output mode.

•For the DVD MULTI playback mode connection, see page 7.

•For details on the DVD MULTI playback mode, see page 33.

*Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1997 Dolby Laboratories, Inc. All rights reserved.

**Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-wide patents issues and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater Systems, Inc. All rights reserved.

English

26

Page 28 Page 30
Image 29
Page 28 Page 30
Contents RX-7000RBK Achtung -- STANDBY/ON -Schalter Per I’ltaliaEspañol Italiano Table of Contents Front Panel Remote ControlParts Identification Checking the Supplied Accessories Before InstallationConnecting the FM and AM MW/LW Antennas Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting the rear and center speakers Connecting Audio/Video ComponentsConnecting the subwoofer speaker About the speaker impedanceVideo component connections CD playerCassette deck or MD recorder DVD player TV and/or DBS tunerDVD player DBS tunerDigital output terminal Digital connectionsDigital input terminals Putting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet R6PSUM-3/AA15FFrom the remote control Turning the Power On and Off StandbyBasic Operations Selecting the Source to PlaySelecting the Front Speakers Adjusting the VolumeEtc Turn Source Selector toAdjusting the Subwoofer Output Level Attenuating the Input SignalMuting the Sound Reinforcing the BassAdjusting the Front Speaker Output Balance Basic SettingsSetting the Subwoofer Information Recording a SourceRear Delay appears on Display Setting the Speakers for the DSP ModesPress Setting repeatedly until Turn Multi JOG to select Crossover FRQ Crossover Frequency appears on the displayLFE ATT Low Frequency Effect Attenuator appears on Display Low frequency effect attenuator LevelSelecting the Analog or Digital Input Mode Digital Input Digital in Terminal SettingShowing the Text Information on Display Press ONE Touch OPERATION. Onetouchoperation Adjust the sound using the functions listed aboveUsing the Sleep Timer Receiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Selecting the FM Reception Mode Assigning Names to Preset StationsSearching for a Program by PTY Codes Using the RDS Radio Data System to Receive FM StationsPress PTY Search while Listening to an FM stationPTY codes Turn Multi JOG until the PTYPress PTY Search while listening to an FM station Press EON so that the last selected Switching to a Broadcast Program of Your Choice TemporarilyProgram type appears on Display Press TA/NEWS/INFO untilSelecting Your Favorite SEA Mode Using the SEA ModesCreating Your Own SEA Mode Press SEA Adjust repeatedlyDAP modes Using the DSP Modes3D-PHONIC modes Surround modes DVD Multi Playback ModeAvailable DSP Modes According to the Speaker Arrangement By pressing DSP Mode By pressing Surround ModeAvailable DSP modes FrontAdjusting the DAP Modes Adjusting the 3D-PHONIC ModesAdjusting the Surround Modes Repeatedly until Theater Appears on the display JVC Theater Surround adjustmentsPress Test again to stop the test tone. Test Theater appears on Display To cancel the Dolby/DTS/MPEG Surround modeActivating the DSP Modes Select and play a sound sourceTo cancel the DSP mode Repeatedly until the DSP mode youWant appears on the display For the other DSP modesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayUsing the On-Screen Menus Input Attenuator mode Press @/ #to adjustPress %/ Þto move to Sound CONTROL, then press @/ # To BAL. BalanceTo Surround LEVEL, then press To SEA Mode@/ # Press %/ Þto move To SEA, then pressPress SET to store the setting into the SEA Usermode Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress %/ Þto move to SETTING, then Press @/ # Set or adjust, then press @/ #To Preset Press %/ Þto move to Preset Name Then press SETPress %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þ / @/ #to Move in front of a character you wantRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Disc Title InputShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Disc Information screen appears on the TVPress %/ Þto move To SEARCH, then Press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move To GENRE, then Press SET Press %/ Þto move To Search Then press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationEnter the disc title Referring to steps 3 Press Text Display while MD is selected as the sourcePress %/ Þto move to the genre you want, then press SET Press %/ Þto move To Title Input Then press SETOperating Audio Components Operating JVC’s Audio/Video ComponentsTuner Sound control section Amplifier7/P CD player-changerTurntable Cassette deckDVD player Operating Video ComponentsChannel + 0, 100+Operating Other Manufacturers’ Video Equipment If there are more than one code listed for your brand of TVRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSRelease VCR If there are more than one code listed for your brandTry to operate your VCR by pressing VCR RECManufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for VCR Manufacturers’ codes for Catv convertersNEC ESCITV Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsAudio VideoGeneral FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0400HIMMDWJEIN

RX-7000RBK specifications

The JVC RX-7000RBK is a high-quality AV receiver that combines sophisticated technology with user-friendly features, making it a popular choice among audio enthusiasts and home theater setups. This receiver is designed to deliver superior sound performance while providing a host of options to cater to diverse audio and video formats.

At the heart of the RX-7000RBK is a robust amplifier capable of producing 100 watts per channel, ensuring powerful output that can fill any room with rich, dynamic sound. The receiver supports a variety of audio channels, allowing users to experience multi-channel surround sound, enhancing the overall cinematic experience whether you’re watching movies or listening to music.

One of the standout features of the RX-7000RBK is its compatibility with various surround sound formats. It supports Dolby Digital, DTS, and other advanced audio technologies, providing an immersive listening experience. The receiver also features a built-in Digital Signal Processor (DSP) that offers numerous sound modes to optimize audio playback, allowing users to tailor the sound to their preferences and the content being played.

Connectivity is another significant attribute of the RX-7000RBK. The receiver includes multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily switch between different sources without hassle. Additionally, it features analog inputs, optical and coaxial digital audio inputs, and a USB port for compatibility with a wide range of audio devices.

The RX-7000RBK also comes equipped with an FM/AM tuner, expanding its versatility by allowing users to enjoy their favorite radio stations. The receiver is designed with an intuitive onboard interface that makes navigation seamless, while the included remote control allows users to manage settings from a distance.

Another notable technology integrated into the RX-7000RBK is its energy-saving mode, which reduces power consumption when the receiver is not in use. This feature ensures that users can enjoy high-performance audio without worrying about excessive energy use.

Overall, the JVC RX-7000RBK is an exceptional AV receiver that combines powerful audio performance with a range of features and modern technologies. Its ability to support various audio formats, extensive connectivity options, and user-friendly design makes it a strong contender for anyone looking to enhance their home entertainment experience. Whether for film, music, or gaming, the RX-7000RBK delivers a versatile and enjoyable audio experience.
Top Page Image Contents