JVC RX-7000RBK Using the RDS Radio Data System to Receive FM Stations, Press PTY Search while

Page 24

English

Using the RDS (Radio Data System) to

Receive FM Stations

RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS service, the RDS indicator lights up on the display.

With the receiver, you can receive the following types of RDS signals.

PS (Program Service): Shows commonly known station names

PTY (Program Type): Shows types of broadcast programs

RT (Radio Text): Shows text messages the station sends

EON (Enhanced Other Network): See page 23.

Notes:

•RDS is not available for AM (MW/LW) broadcasts.

•RDS may not operate correctly if the station tuned is not transmitting RDS signal properly or if the signal strength is weak.

What information can RDS signals provide?

You can see the RDS signals the station sends on the display.

To show the RDS signals

Press DISPLAY MODE while listening to an FM station.

DISPLAY MODE

 

 

STOP

 

DISPLAY MODE

On the front panel

On the remote

•Each time you press the button, the display changes to show you the following information:

PS PTY

Frequency RT

PS (Program Service):

While searching, “PS” appears and then the station names will be displayed. “NO PS” appears if no signal is sent.

PTY (Program Type):

While searching, “PTY” appears and then the type of the broadcast program will be displayed. “NO PTY” appears if no signal is sent.

RT (Radio Text):

While searching, “RT” appears and then text messages the station sends will be displayed. “NO RT” appears if no signal is sent.

Frequency:

Station frequency (non-RDS service)

Notes:

•When pressing DISPLAY MODE on the remote control, make sure that you have selected FM station using the remote control. If not, the DISPLAY MODE button does not work for tuner operation.

(Pressing FM/AM activates the remote control for tuner operation.)

•If searching finishes at once, “PS,” “PTY,” and “RT” will not appear on the display.

You can also show the RDS information on the TV screen.

To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’s input mode to the proper position to which the receiver is connected.

•When the TV’s input mode is incorrect; for example, a different video input or TV tuner mode is selected, you cannot show the RDS information on the TV screen.

Press TEXT DISPLAY while listening to an FM

TEXT

station.

DISPLAY

The following information appears on the TV screen.

Selected station

Program service Program type Radio text

To erase the RDS information, press EXIT.

EXIT

Note:

The on-screen display will disappear in the following case:

–if no operation is done for about 10 minutes.

–if you do any operation other than explained in this section.

Searching for a Program by PTY Codes

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels (see page 19) by specifying the PTY codes.

To search for a program using the PTY codes

Before you start, remember...

•The PTY Search is only applicable to preset stations.

•To stop searching any time during the process, press PTY SEARCH while searching.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•When pressing the buttons on the remote control, make sure that you have selected the FM station using the remote control. If not, the RDS operation buttons do not work for RDS operation.

(Pressing FM/AM activates the remote control for RDS operation.)

FM/AM

/REW

PLAY

FF/

 

PTY

PTY SEARCH

PTY

 

 

STOP

 

 

 

DISPLAY MODE

 

On the front panel:

1. Press PTY SEARCH while

PTY SEARCH

 

listening to an FM station.

 

“PTY SELECT” flashes on the display.

21

Page 23 Page 25
Image 24
Page 23 Page 25
Contents RX-7000RBK Per I’ltalia Achtung -- STANDBY/ON -SchalterEspañol Italiano Table of Contents Remote Control Parts IdentificationFront Panel Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker About the speaker impedanceCD player Cassette deck or MD recorderVideo component connections TV and/or DBS tuner DVD playerDVD player DBS tunerDigital connections Digital input terminalsDigital output terminal Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby From the remote controlBasic Operations Selecting the Source to PlayAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Adjusting the Subwoofer Output LevelMuting the Sound Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Recording a SourceSetting the Speakers for the DSP Modes Press Setting repeatedly untilRear Delay appears on Display Crossover FRQ Crossover Frequency appears on the display Turn Multi JOG to selectLFE ATT Low Frequency Effect Attenuator appears on Display Low frequency effect attenuator LevelDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeShowing the Text Information on Display Adjust the sound using the functions listed above Using the Sleep TimerPress ONE Touch OPERATION. Onetouchoperation Using Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts Assigning Names to Preset Stations Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations Searching for a Program by PTY CodesPress PTY Search while Listening to an FM stationTurn Multi JOG until the PTY Press PTY Search while listening to an FM stationPTY codes Switching to a Broadcast Program of Your Choice Temporarily Press EON so that the last selectedProgram type appears on Display Press TA/NEWS/INFO untilUsing the SEA Modes Selecting Your Favorite SEA ModeCreating Your Own SEA Mode Press SEA Adjust repeatedlyUsing the DSP Modes 3D-PHONIC modesDAP modes DVD Multi Playback Mode Surround modesBy pressing DSP Mode By pressing Surround Mode Available DSP Modes According to the Speaker ArrangementAvailable DSP modes FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes JVC Theater Surround adjustments Press Test again to stop the test tone. TestRepeatedly until Theater Appears on the display To cancel the Dolby/DTS/MPEG Surround mode Theater appears on DisplayActivating the DSP Modes Select and play a sound sourceRepeatedly until the DSP mode you To cancel the DSP modeWant appears on the display For the other DSP modesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayUsing the On-Screen Menus Press @/ #to adjust Input Attenuator modePress %/ Þto move to Sound CONTROL, then press @/ # To BAL. BalanceTo SEA Mode To Surround LEVEL, then press@/ # Press %/ Þto move To SEA, then pressPress %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move to SETTING, then Press @/ # Set or adjust, then press @/ #Press %/ Þto move to Preset Name Then press SET To PresetPress %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þ / @/ #to Move in front of a character you wantCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, then Press SETPress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move To Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Enter the disc title Referring to steps 3Press %/ Þto move to the genre you want, then press SET Press %/ Þto move To Title Input Then press SETOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player-changer 7/PTurntable Cassette deckOperating Video Components DVD playerChannel + 0, 100+If there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSIf there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR RECManufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters Manufacturers’ codes for VCRESC ITVNEC Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio VideoFM tuner IHF AM MW/LW tunerGeneral EN, GE, FR, NL, SP, IT 0400HIMMDWJEIN

RX-7000RBK specifications

The JVC RX-7000RBK is a high-quality AV receiver that combines sophisticated technology with user-friendly features, making it a popular choice among audio enthusiasts and home theater setups. This receiver is designed to deliver superior sound performance while providing a host of options to cater to diverse audio and video formats.

At the heart of the RX-7000RBK is a robust amplifier capable of producing 100 watts per channel, ensuring powerful output that can fill any room with rich, dynamic sound. The receiver supports a variety of audio channels, allowing users to experience multi-channel surround sound, enhancing the overall cinematic experience whether you’re watching movies or listening to music.

One of the standout features of the RX-7000RBK is its compatibility with various surround sound formats. It supports Dolby Digital, DTS, and other advanced audio technologies, providing an immersive listening experience. The receiver also features a built-in Digital Signal Processor (DSP) that offers numerous sound modes to optimize audio playback, allowing users to tailor the sound to their preferences and the content being played.

Connectivity is another significant attribute of the RX-7000RBK. The receiver includes multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily switch between different sources without hassle. Additionally, it features analog inputs, optical and coaxial digital audio inputs, and a USB port for compatibility with a wide range of audio devices.

The RX-7000RBK also comes equipped with an FM/AM tuner, expanding its versatility by allowing users to enjoy their favorite radio stations. The receiver is designed with an intuitive onboard interface that makes navigation seamless, while the included remote control allows users to manage settings from a distance.

Another notable technology integrated into the RX-7000RBK is its energy-saving mode, which reduces power consumption when the receiver is not in use. This feature ensures that users can enjoy high-performance audio without worrying about excessive energy use.

Overall, the JVC RX-7000RBK is an exceptional AV receiver that combines powerful audio performance with a range of features and modern technologies. Its ability to support various audio formats, extensive connectivity options, and user-friendly design makes it a strong contender for anyone looking to enhance their home entertainment experience. Whether for film, music, or gaming, the RX-7000RBK delivers a versatile and enjoyable audio experience.
Top Page Image Contents