JVC RX-7000RBK manual Press Text Display while CD or MD is selected as the source, Press Exit

Page 44

English

OPERATIONS

To use this remote control system, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the TV’s input mode to the proper position to which the receiver is connected. Make sure you have connected the CD player or

MD recorder equipped with the TEXT COMPU LINK remote control system. If not, you cannot use the following functions.

On-Screen Operation buttons (on the remote control)

1Source name: CD or MD

2Select or , then press SET to change the disc.

3 Track numbers and track titles.

•The current playing (selected) track is indicated in yellow.

•When you move to a track number, you can change the track information by pressing @/ #. Each time you press the button, track information alternates between its track title and its performer. (You can also

start playing the track by pressing SET.)

4Select this (move in front), then press SET to go to the DISC SEARCH screen (see page 42).

5Select this (move in front), then press SET to go to the TITLE INPUT screen (see page 43).

6This appears only when a CD Text is selected.

 

 

TV/CATV/DBS

VCR

DVD

DVD MUILTI

CD

TAPE/MD

TV/DBS

 

PHONO

FM/AM

VCR

 

ANALOG/DIGITAL

SLEEP

SURROUND

 

CENTER

ON/OFF

1

2

3

 

 

MENU

SURROUND

TEST

REAR-L

MODE

4

5

6

 

 

ENTER

CD-DISC

EFFECT

REAR-R

 

7/P

8

9

SOUND

SEA MODE

SUBWOOFER

 

10

0

+10

 

RETURN

FM MODE

100+

AUDIO/

TV/VCR

MENU

 

CATV/DBS

 

SET

EXIT

TEXT

 

DISPLAY

TV VOL

CHANNEL

VOLUME

TV/VIDEO

VCR

TAPE/MD

MUTING

 

CONTROL

 

/REW

PLAY

FF/

PTY

PTY SEARCH

PTY

RECSTOPPAUSE

DISPLAY MODE

MENU

 

 

SET

EXIT

TEXT

DISPLAY

 

7Disc information such as the disc title, performer, and music genre.

When this is selected ( in front), you can change the disc information by pressing @/ #. Each time you press the button, disc information (see “Note on 7”) changes.

8Select or , then press SET to change the track.

9 Usable buttons and their functions for the current selection.

Indication here will be changed according to what is

currently selected ( in front) on the screen. See “Note on 9.”

Note on 7:

The following information will appear on the display:

RM-SRX7000R REMOTE CONTROL

•For CD Texts — Disc title, Performer, Genre, Song writer, Composer, Arranger, Message

Only recorded information will be shown. If there is no data, “NO DATA” will appear.

•For MDs — Disc title

If there is no data, “NO DATA” will appear.

Showing the Disc Information on the TV Screen

Press TEXT DISPLAY while “CD” or “MD” is selected as the source.

The Disc Information screen appears on the TV.

1

2

3

4

5

Note on 9:

For example, the SET button will be used to start play (PLAY), to go to the next screen (ENTER), and to determine the selection (ENTER).

To exit from the Disc information screen:

Press EXIT.

Notes:

•The on-screen display will disappear in the following cases:

– if no operation is done for about 10 minutes.

6– if you do any operation other than explained in this section.

• To control the MD recorder using the TEXT COMPU LINK remote

7control system, you have to change the source name shown on the display from “TAPE” to “MD.” (See page 13.)

8• Some special characters and marks cannot be displayed correctly.

9

41

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-7000RBK Per I’ltalia Achtung -- STANDBY/ON -SchalterEspañol Italiano Table of Contents Front Panel Remote ControlParts Identification Before Installation Checking the Supplied AccessoriesConnecting the FM and AM MW/LW Antennas Getting StartedConnecting the Speakers Basic connecting procedureConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting Audio/Video Components Connecting the rear and center speakersConnecting the subwoofer speaker About the speaker impedanceVideo component connections CD playerCassette deck or MD recorder TV and/or DBS tuner DVD playerDVD player DBS tunerDigital output terminal Digital connectionsDigital input terminals Connecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet R6PSUM-3/AA15FTurning the Power On and Off Standby From the remote controlBasic Operations Selecting the Source to PlayAdjusting the Volume Selecting the Front SpeakersEtc Turn Source Selector toAttenuating the Input Signal Adjusting the Subwoofer Output LevelMuting the Sound Reinforcing the BassBasic Settings Adjusting the Front Speaker Output BalanceSetting the Subwoofer Information Recording a SourceRear Delay appears on Display Setting the Speakers for the DSP ModesPress Setting repeatedly until Crossover FRQ Crossover Frequency appears on the display Turn Multi JOG to selectLFE ATT Low Frequency Effect Attenuator appears on Display Low frequency effect attenuator LevelDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeShowing the Text Information on Display Press ONE Touch OPERATION. Onetouchoperation Adjust the sound using the functions listed aboveUsing the Sleep Timer Receiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Assigning Names to Preset Stations Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations Searching for a Program by PTY CodesPress PTY Search while Listening to an FM stationPTY codes Turn Multi JOG until the PTYPress PTY Search while listening to an FM station Switching to a Broadcast Program of Your Choice Temporarily Press EON so that the last selectedProgram type appears on Display Press TA/NEWS/INFO untilUsing the SEA Modes Selecting Your Favorite SEA ModeCreating Your Own SEA Mode Press SEA Adjust repeatedlyDAP modes Using the DSP Modes3D-PHONIC modes DVD Multi Playback Mode Surround modesBy pressing DSP Mode By pressing Surround Mode Available DSP Modes According to the Speaker ArrangementAvailable DSP modes FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Repeatedly until Theater Appears on the display JVC Theater Surround adjustmentsPress Test again to stop the test tone. Test To cancel the Dolby/DTS/MPEG Surround mode Theater appears on DisplayActivating the DSP Modes Select and play a sound sourceRepeatedly until the DSP mode you To cancel the DSP modeWant appears on the display For the other DSP modesUsing the DVD Multi Playback Mode Activating the DVD Multi Playback ModePress DVD Multi so that DVD Multi appears on the displayUsing the On-Screen Menus Press @/ #to adjust Input Attenuator modePress %/ Þto move to Sound CONTROL, then press @/ # To BAL. BalanceTo SEA Mode To Surround LEVEL, then press@/ # Press %/ Þto move To SEA, then pressPress %/ Þ/ @/ #to adjust the SEA mode as you want Press SET to store the setting into the SEA UsermodePress %/ Þto move to SETTING, then Press @/ # Set or adjust, then press @/ #Press %/ Þto move to Preset Name Then press SET To PresetPress %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þ / @/ #to Move in front of a character you wantCompu Link Remote Control System Remote Control through the Remote Sensor on the ReceiverSame time Automatic Source SelectionText Compu Link Remote Control System Displaying the Disc Information on the TV screenDisc Search Only for CD Player Disc Title InputPress Text Display while CD or MD is selected as the source Showing the Disc Information on the TV ScreenTo exit from the Disc information screen Disc Information screen appears on the TVPress Text Display while CD is selected as the source Press %/ Þto move To SEARCH, then Press SETPress %/ Þto move To Performer Then press SET Press SET againPress %/ Þto move To Search Then press SET Press %/ Þto move To GENRE, then Press SETPress %/ Þto move To Title INPUT, then press SET Entering the Disc InformationPress Text Display while MD is selected as the source Enter the disc title Referring to steps 3Press %/ Þto move to the genre you want, then press SET Press %/ Þto move To Title Input Then press SETOperating JVC’s Audio/Video Components Operating Audio ComponentsTuner Sound control section AmplifierCD player-changer 7/PTurntable Cassette deckOperating Video Components DVD playerChannel + 0, 100+If there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentRelease TV/CATV/DBS Try to operate your TV by pressing TV/CATV DBSIf there are more than one code listed for your brand Release VCRTry to operate your VCR by pressing VCR RECManufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters Manufacturers’ codes for VCRNEC ESCITV Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierAudio VideoGeneral FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0400HIMMDWJEIN

RX-7000RBK specifications

The JVC RX-7000RBK is a high-quality AV receiver that combines sophisticated technology with user-friendly features, making it a popular choice among audio enthusiasts and home theater setups. This receiver is designed to deliver superior sound performance while providing a host of options to cater to diverse audio and video formats.

At the heart of the RX-7000RBK is a robust amplifier capable of producing 100 watts per channel, ensuring powerful output that can fill any room with rich, dynamic sound. The receiver supports a variety of audio channels, allowing users to experience multi-channel surround sound, enhancing the overall cinematic experience whether you’re watching movies or listening to music.

One of the standout features of the RX-7000RBK is its compatibility with various surround sound formats. It supports Dolby Digital, DTS, and other advanced audio technologies, providing an immersive listening experience. The receiver also features a built-in Digital Signal Processor (DSP) that offers numerous sound modes to optimize audio playback, allowing users to tailor the sound to their preferences and the content being played.

Connectivity is another significant attribute of the RX-7000RBK. The receiver includes multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily switch between different sources without hassle. Additionally, it features analog inputs, optical and coaxial digital audio inputs, and a USB port for compatibility with a wide range of audio devices.

The RX-7000RBK also comes equipped with an FM/AM tuner, expanding its versatility by allowing users to enjoy their favorite radio stations. The receiver is designed with an intuitive onboard interface that makes navigation seamless, while the included remote control allows users to manage settings from a distance.

Another notable technology integrated into the RX-7000RBK is its energy-saving mode, which reduces power consumption when the receiver is not in use. This feature ensures that users can enjoy high-performance audio without worrying about excessive energy use.

Overall, the JVC RX-7000RBK is an exceptional AV receiver that combines powerful audio performance with a range of features and modern technologies. Its ability to support various audio formats, extensive connectivity options, and user-friendly design makes it a strong contender for anyone looking to enhance their home entertainment experience. Whether for film, music, or gaming, the RX-7000RBK delivers a versatile and enjoyable audio experience.
Top Page Image Contents