JVC RX-7000RBK manual Operating Video Components, DVD player, Channel +, 0, 100+, Return

Page 50

English

 

 

 

Operating Video Components

 

 

 

IMPORTANT:

 

 

 

To operate JVC’s video components using this remote control:

•Aim the remote control directly at the remote sensor on the VCR, DVD player or TV, not on the receiver.

•Some JVC VCRs can accept two types of the control signals — remote code “A” and “B.” Before using this remote control, make sure that the remote control code of the target VCR is set to code “A.”

VCR

You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”):

VCR : Turns on or off the VCR.

After pressing VCR or VCR CONTROL (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on the VCR:

1 – 9, 0: Selects the TV channels on VCR.

PLAY: Starts playing.

1:Rewinds a tape.

`:Fast winds a tape.

STOP: Stops operations.

PAUSE: Pauses playing. To release it, press PLAY.

ƒREC: Press this button with the PLAY button to start recording.

Press this button with the PAUSE button to enter recording pause.

CHANNEL +/–: Changes the TV channels on the VCR.

 

TV/CATV/DBS

VCR

DVD

DVD MUILTI

CD

TAPE/MD

TV/DBS

 

PHONO

FM/AM

VCR

ANALOG/DIGITAL SLEEP

SURROUND

 

CENTER

ON/OFF

1

2

3

 

 

MENU

SURROUND

TEST

REAR-L

MODE

4

5

6

 

 

ENTER

CD-DISC

EFFECT

REAR-R

 

7/P

8

9

SOUND

SEA MODE

SUBWOOFER

 

10

0

+10

 

RETURN

FM MODE

100+

 

 

 

AUDIO/

 

 

 

TV/VCR

MENU

 

 

 

 

 

 

CATV/DBS

 

SET

 

 

EXIT

 

 

TEXT

 

 

 

DISPLAY

TV VOL

CHANNEL

VOLUME

TV/VIDEO

VCR

TAPE/MD

MUTING

 

CONTROL

 

/REW

PLAY

FF/

PTY

PTY SEARCH

PTY

REC

STOP

PAUSE

AUDIO/

TV/VCR

CATV/DBS

Check to see if the remote control mode selector is set to the correct position.

To operate the audio system, TVs, VCRs, and

Note:

You can use either VCR button or the VCR CONTROL button to activate the buttons listed above. If you press VCR, the playing source also changes. On the other hand, if you press VCR CONTROL, the playing source does not change.

DVD player

After pressing DVD or DVD MULTI (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a DVD player:

PLAY:

Starts playing.

4:

Returns to the beginning of the current (or previous) track.

¢:

Skips to the beginning of the next track.

STOP:

Stops playing.

PAUSE: Stops playing temporarily. To release it, press PLAY.

DISPLAY MODE

DVD players, set it to

“AUDIO/TV/VCR.”

After pressing DVD or DVD MULTI, these buttons can be used

CENTER

RM-SRX7000R REMOTE CONTROL

for the DVD menu operations.

2

3

 

 

MENU

 

 

 

 

TEST

 

REAR-L

 

 

Note:

4

5

6

 

 

 

 

 

ENTER

For detailed menu operations, refer to the

 

 

REAR-R

8

 

instructions supplied with the discs or the

 

 

DVD player.

TV

You can always perform the following operations (with the remote control mode selector set to “AUDIO/TV/VCR”):

TV/CATV/DBS : Turns on or off the TV.

TV VOL +/–:Adjusts the volume.

TV/VIDEO:Sets the input mode (either TV or VIDEO).

After pressing TV/DBS (with the remote control mode selector set to “AUDIO/TV/VCR”), you can perform the following operations on a TV:

CHANNEL +/–:

Changes the channels.

1 – 9, 0, 100+:

Selects the channels.

RETURN:

Alternates between the previously selected

 

channel and the current channel.

47

Page 49 Page 51
Image 50
Page 49 Page 51
Contents RX-7000RBK Per I’ltalia Achtung -- STANDBY/ON -SchalterEspañol Italiano Table of Contents Front Panel Remote ControlParts Identification Connecting the FM and AM MW/LW Antennas Before InstallationChecking the Supplied Accessories Getting StartedConnecting the front speakers Connecting the SpeakersBasic connecting procedure AM MW/LW Antenna ConnectionsConnecting the subwoofer speaker Connecting Audio/Video ComponentsConnecting the rear and center speakers About the speaker impedanceVideo component connections CD playerCassette deck or MD recorder DVD player TV and/or DBS tunerDVD player DBS tunerDigital output terminal Digital connectionsDigital input terminals Plug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control R6PSUM-3/AA15FBasic Operations Turning the Power On and Off StandbyFrom the remote control Selecting the Source to PlayEtc Adjusting the VolumeSelecting the Front Speakers Turn Source Selector toMuting the Sound Attenuating the Input SignalAdjusting the Subwoofer Output Level Reinforcing the BassSetting the Subwoofer Information Basic SettingsAdjusting the Front Speaker Output Balance Recording a SourceRear Delay appears on Display Setting the Speakers for the DSP ModesPress Setting repeatedly until LFE ATT Low Frequency Effect Attenuator appears on Display Crossover FRQ Crossover Frequency appears on the displayTurn Multi JOG to select Low frequency effect attenuator LevelDigital Input Digital in Terminal Setting Selecting the Analog or Digital Input ModeShowing the Text Information on Display Press ONE Touch OPERATION. Onetouchoperation Adjust the sound using the functions listed aboveUsing the Sleep Timer Receiving Radio Broadcasts Using Preset TuningTuning in Stations Manually Assigning Names to Preset Stations Selecting the FM Reception ModePress PTY Search while Using the RDS Radio Data System to Receive FM StationsSearching for a Program by PTY Codes Listening to an FM stationPTY codes Turn Multi JOG until the PTYPress PTY Search while listening to an FM station Program type appears on Display Switching to a Broadcast Program of Your Choice TemporarilyPress EON so that the last selected Press TA/NEWS/INFO untilCreating Your Own SEA Mode Using the SEA ModesSelecting Your Favorite SEA Mode Press SEA Adjust repeatedlyDAP modes Using the DSP Modes3D-PHONIC modes DVD Multi Playback Mode Surround modesAvailable DSP modes By pressing DSP Mode By pressing Surround ModeAvailable DSP Modes According to the Speaker Arrangement FrontAdjusting the 3D-PHONIC Modes Adjusting the DAP ModesAdjusting the Surround Modes Repeatedly until Theater Appears on the display JVC Theater Surround adjustmentsPress Test again to stop the test tone. Test Activating the DSP Modes To cancel the Dolby/DTS/MPEG Surround modeTheater appears on Display Select and play a sound sourceWant appears on the display Repeatedly until the DSP mode youTo cancel the DSP mode For the other DSP modesPress DVD Multi so that DVD Using the DVD Multi Playback ModeActivating the DVD Multi Playback Mode Multi appears on the displayUsing the On-Screen Menus Press %/ Þto move to Sound CONTROL, then press @/ # Press @/ #to adjustInput Attenuator mode To BAL. Balance@/ # To SEA ModeTo Surround LEVEL, then press Press %/ Þto move To SEA, then pressPress %/ Þto move to SETTING, then Press @/ # Press %/ Þ/ @/ #to adjust the SEA mode as you wantPress SET to store the setting into the SEA Usermode Set or adjust, then press @/ #Press %/ Þto move to Tuner CONTROL, then press @/ # Press %/ Þto move to Preset Name Then press SETTo Preset Press %/ Þ / @/ #to Move in front of a character you wantSame time Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Automatic Source SelectionDisc Search Only for CD Player Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Title InputTo exit from the Disc information screen Press Text Display while CD or MD is selected as the sourceShowing the Disc Information on the TV Screen Disc Information screen appears on the TVPress %/ Þto move To Performer Then press SET Press Text Display while CD is selected as the sourcePress %/ Þto move To SEARCH, then Press SET Press SET againPress %/ Þto move To Title INPUT, then press SET Press %/ Þto move To Search Then press SETPress %/ Þto move To GENRE, then Press SET Entering the Disc InformationPress %/ Þto move to the genre you want, then press SET Press Text Display while MD is selected as the sourceEnter the disc title Referring to steps 3 Press %/ Þto move To Title Input Then press SETTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD player-changer7/P Cassette deckChannel + Operating Video ComponentsDVD player 0, 100+Release TV/CATV/DBS If there are more than one code listed for your brand of TVOperating Other Manufacturers’ Video Equipment Try to operate your TV by pressing TV/CATV DBSTry to operate your VCR by pressing VCR If there are more than one code listed for your brandRelease VCR RECManufacturers’ codes for TV Manufacturers’ codes for DBS tuner Manufacturers’ codes for Catv converters Manufacturers’ codes for VCRNEC ESCITV Troubleshooting Problem Possible Cause SolutionAudio SpecificationsAmplifier VideoGeneral FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0400HIMMDWJEIN

RX-7000RBK specifications

The JVC RX-7000RBK is a high-quality AV receiver that combines sophisticated technology with user-friendly features, making it a popular choice among audio enthusiasts and home theater setups. This receiver is designed to deliver superior sound performance while providing a host of options to cater to diverse audio and video formats.

At the heart of the RX-7000RBK is a robust amplifier capable of producing 100 watts per channel, ensuring powerful output that can fill any room with rich, dynamic sound. The receiver supports a variety of audio channels, allowing users to experience multi-channel surround sound, enhancing the overall cinematic experience whether you’re watching movies or listening to music.

One of the standout features of the RX-7000RBK is its compatibility with various surround sound formats. It supports Dolby Digital, DTS, and other advanced audio technologies, providing an immersive listening experience. The receiver also features a built-in Digital Signal Processor (DSP) that offers numerous sound modes to optimize audio playback, allowing users to tailor the sound to their preferences and the content being played.

Connectivity is another significant attribute of the RX-7000RBK. The receiver includes multiple HDMI inputs, allowing users to connect various devices like Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that users can easily switch between different sources without hassle. Additionally, it features analog inputs, optical and coaxial digital audio inputs, and a USB port for compatibility with a wide range of audio devices.

The RX-7000RBK also comes equipped with an FM/AM tuner, expanding its versatility by allowing users to enjoy their favorite radio stations. The receiver is designed with an intuitive onboard interface that makes navigation seamless, while the included remote control allows users to manage settings from a distance.

Another notable technology integrated into the RX-7000RBK is its energy-saving mode, which reduces power consumption when the receiver is not in use. This feature ensures that users can enjoy high-performance audio without worrying about excessive energy use.

Overall, the JVC RX-7000RBK is an exceptional AV receiver that combines powerful audio performance with a range of features and modern technologies. Its ability to support various audio formats, extensive connectivity options, and user-friendly design makes it a strong contender for anyone looking to enhance their home entertainment experience. Whether for film, music, or gaming, the RX-7000RBK delivers a versatile and enjoyable audio experience.
Top Page Image Contents