JVC RX-D301S, RX-D302B manual Specifications, Amplifier, FM tuner IHF, AM tuner, General

Page 44

Specifications

Designs and specifications are subject to change without notice.

Amplifier

Output Power

At stereo operation:

Front channels: 110 W per channel, min. RMS, driven into 6 Ω at 40 Hz to 20 kHz with no more than 0.8% total harmonic distortion.

At surround operation:

Front channels:

110 W per channel, min. RMS, driven into

 

6 Ω at 1 kHz with no more than 0.8% total

 

harmonic distortion.

Center channel:

110 W, min. RMS, driven into 6 Ω at 1 kHz,

 

with no more than 0.8% total harmonic

 

distortion.

Surround channels: 110 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Surround back channels:

110 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 0.8% total harmonic distortion.

Audio

Audio Input Sensitivity/Impedance:

DVR/DVD (DVD MULTI), VCR, DBS, TV:

270 mV/47 kΩ

Audio Input (DIGITAL IN)*:

Coaxial: DIGITAL IN 1(DVR/DVD):

0.5 V(p-p)/75 Ω

Optical: DIGITAL IN 2(DBS), 3(VCR):

–21 dBm to –15 dBm (660 nm ±30 nm)

USB: USB WIRELESS

USB TERMINAL

*Corresponding to Linear PCM, Dolby Digital, and DTS (with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

 

 

DVR, VCR:

270 mV

Signal-to-Noise Ratio (’66 IHF/’78 IHF):

80 dB/62 dB

Frequency Response (6 Ω):

20

Hz to 20 kHz (±1 dB)

Bass Boost:

+4 dB ±1 dB at 100 Hz

Equalization (at DSP operation):

Center frequency:

63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz

Control range:

±8 dB

Video

Video Input Sensitivity/Impedance:

Composite video: DVR/DVD, VCR, DBS:

1 V(p-p)/75 Ω

S-video: DVR/DVD, VCR, DBS:

 

Y (luminance):

1 V(p-p)/75 Ω

C (chrominance, burst):

0.286 V(p-p)/75 Ω

Component: DVR/DVD, VCR (DBS):

Y (luminance):

1 V(p-p)/75 Ω

PB, PR:

0.7 V(p-p)/75 Ω

Video Output Level/Impedance:

Composite video: DVR, VCR, MONITOR OUT:

 

1 V(p-p)/75 Ω

S-video: DVR, VCR, MONITOR OUT:

Y (luminance):

1 V(p-p)/75 Ω

C (chrominance, burst):

0.286 V(p-p)/75 Ω

Component: MONITOR OUT:

 

Y (luminance):

1 V(p-p)/75 Ω

PB, PR:

0.7 V(p-p)/75 Ω

Synchronization:

Negative

FM tuner (IHF)

Tuning Range:

87.5 MHz to 108.0 MHz

Usable Sensitivity:

 

Monaural:

12.8 dBf (1.2 µV/75 Ω)

50 dB Quieting Sensitivity:

 

Monaural:

16.0 dBf (1.7 µV/75 Ω)

Stereo:

37.5 dBf (20.5 µV/75 Ω)

Stereo Separation at REC OUT:

35 dB at 1 kHz

AM tuner

Tuning Range:530 kHz to 1 710 kHz

General

Power Requirements:

AC 120 V , 60 Hz

Power Consumption:

150 W/200 VA (at operation)

0.9W (in standby mode)

Dimensions (W x H x D): 435 mm x 91.5 mm x 371 mm

 

(17 3/16 inches x 3 5/8 inches x 14 5/8 inches)

Mass:

6.8 kg (15.0 lbs)

USB WIRELESS SYSTEM

The USB wireless transmitter supplied with this receiver supports Direct Sequence Spreading Spectrum (DSSS) using 2.4 GHz frequency band.

42

Page 43 Page 45
Image 44
Page 43 Page 45
Contents RX-D301S / RX-D302B For Customer UseFor U.S.A For Canada/pour le CanadaFor Canada/pour le Canada Table of Contents Parts identification Remote controlWhen operating a DVD player, set the mode selector u to DVD Rear panel Front panelDisplay window Before Installation Putting batteries in the remote controlChecking the supplied accessories Getting startedAntenna Connecting the FM and AM antennasFM antenna connection Connecting the speakers Speaker Layout DiagramConnecting the speakers Connecting the powered subwooferConnecting video components Turn off all components before making connectionsOnly for DVD recorder To S-video input If your video components have AV Compu Link terminalÈ Ô About DVD MultiVCR Å Blue Red Connecting a TVGreen About video signal conversion Digital connectionDigital input terminals Digital output terminalUSB Connection For USB TerminalConnecting the power cord Turn on the power To turn off the power into standbySelecting the analog or digital input mode Basic operationsAdjust the volume Selecting the digital decode modeListening with headphones To restore the sound, press Muting againTurning off the power with the Sleep Timer Basic adjustment of auto memorySignal and speaker indicators on the display Changing the display brightnessBasic settings Press SettingPress SET Before you start, rememberRoom size and the speaker distance/output level Basic setting itemsSpeakers channels number and the size Setting the speakers Setting subwoofer information-SUBWOOFERSetting the surround back speakers-S Back OUT Turn Multi JOG to select the appropriate settingActivating the EX/ES/PLIIx setting- EX/ES/PLIIx Setting the speaker distanceFrom the remote control AutoSelecting the main or sub channel Setting bass soundUsing the Midnight mode Memorizing the volume level for each source-ONE Touch OPE DVD S/CVCR S/C OnetouchonOperating procedure Sound adjustmentsBasic adjustment items Adjusting the speaker output levels Press Test to check the speakers’ output balanceAdjusting the bass sounds Attenuating the input signal-INPUT ATTAdjusting the virtual room size for DSP modes Adjusting the liveness effect for DSP modesAdjusting the center tone-CENTER Tone Tuning in to stations manually Using preset tuningTo store the preset stations Tuner operationsSelecting the FM reception mode To tune in a preset stationCreating realistic sound fields Reproducing theater ambienceIntroducing the Surround modes Dolby DigitalDTS 3D Headphone modeAbout other digital signals Digital Acoustic Processor DAP modes All Channel Stereo mode ALL CH StereoIntroducing the DSP modes Using the Surround/DSP modes DTSDolby Digital Incoming Signal TypeAbout the DSP modes Virtual Surround BackWhen you select Auto Surround Turn Multi JOG to select the Surround/DSP mode you wantSelecting the Surround/DSP modes Select and play any source other than DVD MultiAV Compu Link remote control system Connections 1 AV Compu Link connectionConnections 2 Video cable connection CaseConnecting procedure Automatic selection of TV’s input modeAutomatic power on/off One-touch video playOperating other JVC products VCRChannel + REWChanging the remote control code for DVD recorder DVD recorder or DVD playerRelease DVR/DVD TOP MENU/MENUChanging the transmittable signals for operating a TV Operating other manufacturers’ productsRelease TV Try to operate your TV by pressing TVChanging the transmittable signals for operating a VCR Release VCRTry to operate your VCR by pressing VCR Manufacturers’ codes for VCRRelease DBS/CATV Manufacturers’ codes for Catv converterManufacturers’ codes for DBS tuner Try to operate your DVD player by pressing DVR/DVDTroubleshooting PowerProblem Possible Cause Solution Remote control TunerSpecifications AmplifierFM tuner IHF AM tunerPage Page Audio Video Control Receiver RX-D302B Mises en garde, précautions et indications diverses English Parts identification ID Learning 1DVR/DVD Getting started AM antenna connection Connecting the speakers Connecting video components È Ô Red Component video cable not supplied WhiteDBS tuner Video cable not suppliedAbout video signal conversion USB wireless Transmitter supplied Connecting the power cord Basic operations Auto Surr Digital Changing the display brightness Basic settings Basic setting items Setting the speakers Activating the EX/ES/PLIIx setting- EX/ES/PLIIx Dual Mono DBS Video Sound adjustments Adjusting the speaker output levels Adjusting the bass sounds Dimension Tuner operations Selecting the FM reception mode Creating realistic sound fields DTS Introducing the DSP modes Digital When activating NEO6 MUSIC, you can adjust Center RX-D302B Equipment To video input Connecting procedure Operating other JVC products DVD recorder or DVD player Operating other manufacturers’ products English Release DBS/CATV There are any problems you cannot solve, contact your JVC’s Specifications RX-D302B
Top Page Image Contents