Connecting video components

Do not connect the AC power plug to the wall outlet until all connections are completed.

English

This receiver is equipped with the following video terminals— composite video, S-video, and component video terminals.

•If your video components have S-video (Y/C-separation) and/or component video (Y, PB, PR) jacks, connect them using an S- video cable (not supplied) or component video cable (not supplied). By using these terminals, you can get a better picture quality in the order:

Component > S-video > Composite

IMPORTANT:

This receiver can convert video signals as follows:

•Composite video signals can be converted into both S-video signals and component signals.

•S-video signals can be converted into component signals.

•Component signals cannot be converted.

When converting video signals, there are some points to observe. For details, see “About video signal conversion” on page 11.

Turn off all components before making connections.

•When you connect other components, refer also to their manuals.

DO NOT use a TV through a VCR or a TV with a built-in VCR; otherwise, the picture may be distorted.

CAUTION:

If you connect a sound-enhancing device such as a graphic equalizer between the source components and this receiver, the sound output through this receiver may be distorted.

If your video components have AV COMPU LINK terminal

See also page 34 for detailed information about the connection

and the AV COMPU LINK remote control system.

7Connecting a DVD recorder or DVD player with its stereo output jacks:

COMPONENT VIDEO

		Y
		PB
		PR
VCR(DBS)	DVR/DVD	MONITOR
IN	IN	OUT

DVR DVR/DVD

OUT(REC) IN(PLAY)

Green

Component video cable (not supplied) Blue

Red

DVD recorder or

DVD player

			ı	Ç	Î	‰ Ï Ì
DVR	DVR/DVD	White
OUT(REC)	IN(PLAY)

		Red
	FRONT	Red	Stereo audio cable
		Red	(not supplied)
		White	Composite video cable
			Composite video cable
			(not supplied)

S-video cable (not supplied)

Composite video cable (not supplied)

NOTES

•Select the analog input mode. See “Selecting the analog or digital input mode” on page 14.

•When connecting a DVD recorder or DVD player to the component video input jacks, select the component video input mode (DVD VIDEO IN) correctly. If you do not, you cannot view the playback picture on the TV or the AV COMPU LINK remote control system cannot operate properly. See page 22 for details.

•You can enjoy digital sound if using a digital coaxial or optical cable. When shipped from the factory, the audio input mode for a DVD recorder and DVD player is set to use the digital coaxial terminal (DIGITAL IN 1 (DVR/DVD)). For details of digital connection, see page 11.

ÅTo component video output

•Connect Y, PB, and PR correctly. ı To left/right audio channel output

Ç Only for DVD recorder: To left/right audio channel input

Î To composite video output ‰ To S-video output

Ï Only for DVD recorder: To S-video input

Ì Only for DVD recorder: To composite video input