English
Connecting the speakers
Do not connect the AC power plug to the wall outlet until all connections are completed.
Speaker Layout Diagram
|
| SW |
L | C | R |
LS |
| RS |
SBL | (*SB) | SBR |
Right surround back speaker (SBR)
*Left surround back speaker (SBL)
Right surround
speaker (RS)
Center |
|
speaker (C) | SUBWOOFER |
OUT | |
CAUTION:SPEAKER |
|
IMPEDANCE 6 |
|
RIGHT | LEFT | RIGHT | LEFT |
| RIGHT | LEFT |
SURROUND BACK | SURROUND | CENTER | FRONT | Powered | ||
SPEAKERS | SPEAKERS | SPEAKER | SPEAKERS | |||
subwoofer
(SW)
Left surround |
| Right front |
| Left front |
speaker (LS) |
| speaker |
| speaker |
|
| (R) |
| (L) |
| ||||
|
|
|
|
|
CAUTIONS:
•Use speakers with the SPEAKER IMPEDANCE indicated by the speaker terminals (6 Ω – 16 Ω).
•DO NOT connect more than one speaker to one speaker terminal.
Connecting the speakers
Turn off all components before making connections.
Connecting the center speaker and the front speakers
1 | 2 | 3 | 4 |
1Twist and remove the insulation at the end of each speaker cord.
2Turn the knob counterclockwise.
3Insert the speaker cord.
•For each speaker, connect the (+) and
4Turn the knob clockwise.
Connecting the surround speakers and the surround back speakers
1 | 2 | 1 | 3 |
|
| 2 |
|
+ | + |
– | – |
1Twist and remove the insulation at the end of each speaker cord.
2Open the terminal (1), then insert the speaker cord (2).
•For each speaker, connect the (+) and
3Close the terminal.
*When using a single speaker for the surround back speaker
You can enjoy the surround sound by one surround back speaker. When using one surround back speaker,
–set “SB OUT” to “<1SPK>” (see page 19) and
–connect the surround back speaker to the left surround back speaker terminal. (No sound comes from the speaker if you connect it to the right surround back speaker terminal.)
Connecting the powered subwoofer
By connecting a subwoofer, you can enhance the bass or reproduce the original LFE signals recorded in digital software.
Connect the input jack of a powered subwoofer to the SUBWOOFER OUT jack on the rear panel, using a cord with RCA pin plugs (not supplied).
• Refer also to the manual supplied with your subwoofer.
After connecting all the speakers and/or a subwoofer, set the speaker setting information properly to obtain the best possible surround effect. For details, see pages 17 to 21.
NOTE
You can place a subwoofer wherever you like since bass sound is
6