JVC RX-D302B, RX-D301S manual Operating other manufacturers’ products

Page 87

English

Operating other manufacturers’ products

By changing the transmittable signals, you can use the supplied remote control to operate other manufacturers’ products.

•Refer also to the manuals supplied with the other products.

•To operate those components with the remote control, first you need to set the manufacturers’ codes each for the TV, VCR, CATV converter, DBS tuner, and DVD player.

•After replacing batteries of the remote control, set the manufacturers’ codes again.

•All the functions may not be assigned to the buttons in some equipment.

❏Changing the transmittable signals for operating a TV

1Press and hold TV .

2Press TV.

3Enter the manufacturer’s code using buttons 1 – 9, and 0.

See “Manufacturers’ codes for TV” on the right.

4Release TV .

Now, you can perform the following operations on the TV.

TV :	Turn on or off the TV.
TV VOL +/–:	Adjust the volume on the TV.

TV/VIDEO:	Change the input mode (either TV or
	VIDEO).

After pressing TV, you can perform the following operations on the TV.

CHANNEL +/–:Change the channel numbers.

1 – 9, 0, 100+ (+10): Select the channel numbers.

See the instructions supplied with the TV for details.

5Try to operate your TV by pressing TV .

When your TV turns on or off, you have entered the correct code.

If more than one code is listed for your brand of TV, try each

one until the correct one is entered.

Manufacturers’ codes for TV

Manufacturer	Codes

JVC	01
Akai	02
Bell+Howell	03
Centurion	04
Coronad	05
Daewoo	06, 07, 08
Emerson	09, 10, 11, 12, 13
Fisher	14
GE•Pana	15, 16
GE•RCA	17
Gold Star	18, 19
Hitachi	20, 21
KTV	22, 23
Magnavox	24
Marantz	25
Mitsubishi	25
Panasonic	26, 27
Philips	24
Pioneer	28
Proscan	29
Quasar	30
Radioshack	31
RCA	02, 17, 32, 33, 34, 35
Samsung	36, 37
Sanyo	14
Sears	38
Sharp	39
Sony	40
Symphonic	41, 42
Toshiba	38
Zenith	43, 44

Initial setting: 01

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

38

Image 87

Contents For Customer Use RX-D301S / RX-D302BFor Canada/pour le Canada For Canada/pour le CanadaFor U.S.A Table of Contents Remote control When operating a DVD player, set the mode selector u to DVDParts identification Front panel Display windowRear panel Getting started Before InstallationPutting batteries in the remote control Checking the supplied accessoriesConnecting the FM and AM antennas FM antenna connectionAntenna Connecting the powered subwoofer Connecting the speakersSpeaker Layout Diagram Connecting the speakersIf your video components have AV Compu Link terminal Connecting video componentsTurn off all components before making connections Only for DVD recorder To S-video inputAbout DVD Multi È ÔVCR Å Connecting a TV GreenBlue Red Digital output terminal About video signal conversionDigital connection Digital input terminalsFor USB Terminal USB ConnectionConnecting the power cord Basic operations Turn on the powerTo turn off the power into standby Selecting the analog or digital input modeTo restore the sound, press Muting again Adjust the volumeSelecting the digital decode mode Listening with headphonesChanging the display brightness Turning off the power with the Sleep TimerBasic adjustment of auto memory Signal and speaker indicators on the displayBefore you start, remember Basic settingsPress Setting Press SETBasic setting items Speakers channels number and the sizeRoom size and the speaker distance/output level Turn Multi JOG to select the appropriate setting Setting the speakersSetting subwoofer information-SUBWOOFER Setting the surround back speakers-S Back OUTAuto Activating the EX/ES/PLIIx setting- EX/ES/PLIIxSetting the speaker distance From the remote controlSetting bass sound Using the Midnight modeSelecting the main or sub channel Onetouchon Memorizing the volume level for each source-ONE Touch OPEDVD S/C VCR S/CSound adjustments Basic adjustment itemsOperating procedure Press Test to check the speakers’ output balance Adjusting the speaker output levelsAdjusting the liveness effect for DSP modes Adjusting the bass soundsAttenuating the input signal-INPUT ATT Adjusting the virtual room size for DSP modesAdjusting the center tone-CENTER Tone Tuner operations Tuning in to stations manuallyUsing preset tuning To store the preset stationsTo tune in a preset station Selecting the FM reception modeDolby Digital Creating realistic sound fieldsReproducing theater ambience Introducing the Surround modes3D Headphone mode About other digital signalsDTS All Channel Stereo mode ALL CH Stereo Introducing the DSP modesDigital Acoustic Processor DAP modes Virtual Surround Back Using the Surround/DSP modesDTSDolby Digital Incoming Signal Type About the DSP modesSelect and play any source other than DVD Multi When you select Auto SurroundTurn Multi JOG to select the Surround/DSP mode you want Selecting the Surround/DSP modesCase AV Compu Link remote control systemConnections 1 AV Compu Link connection Connections 2 Video cable connectionOne-touch video play Connecting procedureAutomatic selection of TV’s input mode Automatic power on/offREW Operating other JVC productsVCR Channel +TOP MENU/MENU Changing the remote control code for DVD recorderDVD recorder or DVD player Release DVR/DVDTry to operate your TV by pressing TV Changing the transmittable signals for operating a TVOperating other manufacturers’ products Release TVManufacturers’ codes for VCR Changing the transmittable signals for operating a VCRRelease VCR Try to operate your VCR by pressing VCRTry to operate your DVD player by pressing DVR/DVD Release DBS/CATVManufacturers’ codes for Catv converter Manufacturers’ codes for DBS tunerRemote control Tuner TroubleshootingPower Problem Possible Cause SolutionAM tuner SpecificationsAmplifier FM tuner IHFPage Page Audio Video Control Receiver RX-D302B Mises en garde, précautions et indications diverses English Parts identification ID Learning 1DVR/DVD Getting started AM antenna connection Connecting the speakers Connecting video components È Ô Red Video cable not supplied Component video cable not suppliedWhite DBS tunerAbout video signal conversion USB wireless Transmitter supplied Connecting the power cord Basic operations Auto Surr Digital Changing the display brightness Basic settings Basic setting items Setting the speakers Activating the EX/ES/PLIIx setting- EX/ES/PLIIx Dual Mono DBS Video Sound adjustments Adjusting the speaker output levels Adjusting the bass sounds Dimension Tuner operations Selecting the FM reception mode Creating realistic sound fields DTS Introducing the DSP modes Digital When activating NEO6 MUSIC, you can adjust Center RX-D302B Equipment To video input Connecting procedure Operating other JVC products DVD recorder or DVD player Operating other manufacturers’ products English Release DBS/CATV There are any problems you cannot solve, contact your JVC’s Specifications RX-D302B