Basic settings
To obtain the best possible sound effect from Surround/DSP modes (see pages 29 to 33), you need to set up the speaker and subwoofer information after all the connections are completed. From pages 17 to 22, how to set speakers and other basic items of the receiver are explained.
Setting the speaker information easily—Quick Speaker Setup
Quick Speaker Setup helps you to easily and quickly register the speaker size, speaker distance, and output level of each speaker according to your listening room to create the best possible surround effect.
•You can also register each speaker’s information manually. For details, see pages 20 and 24.
| 1,7 | 2,4,6 | 1,3,5 |
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Before you start, remember...
There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
1Press SETTING and turn MULTI JOG until "QUICK SPK SET" appears on the display.
ANALOG
LR
S.WFR
2Press SET.
ANALOG
LR
S.WFR
3Turn MULTI JOG to select an appropriate number of the connected speakers (speaker channel number).
As you turn the jog, the speaker channel number changes as
follows.
•For the details of speaker channel number, see “ Speakers (channels) number and the size” on page 18.
ANALOG
LR
S.WFR
2.0ch 
2.1ch 
3.0ch 
3.1ch
4.0ch 
4.1ch 
5.0ch 
5.1ch
6.0ch
6.1ch 
7.0ch* 
7.1ch
(Back to the beginning)
* “7.0ch” is the initial setting.
4Press SET.
ANALOG
LR
S.WFR
5Turn MULTI JOG to select an appropriate room size to match to your listening room.
As you turn the jog, the room size changes as follows.
•To select your appropriate room size, see “Room size and the speaker distance/output level” on page 18.
ANALOG
LR
S.WFR
S |
| M |
| L* |
| (Back to the beginning) |
|
|
|
* “L” is the initial setting.
6Press SET.
QUICK SPEAKER SETUP is now completed, then the display goes back to SETTING menu.
7Press SETTING.
NOTES
•This procedure will not be completed if you stop in the middle of the setting process.
•Once Quick Speaker Setup is performed, the speaker output levels are also set to appropriate values automatically (common to all sources). If you want to set the speaker output levels separately for each source, see “Adjusting the speaker output levels” on page 24.
CONTINUED ON THE NEXT PAGE
English
17