Weider 831.153930f user manual Repeat this step with the other end of the Squat Arm

Page 20

57.Attach the Seat (16) to the Seat Frame (8) with two 1/4” x 3/4” Screws (114), a 1/4” x 2 1/2” Screw (99), and a 1/4” Washer (97).

58.Attach the Butterfly Backrest (15) to the Butterfly Upright (3) with four 1/4” x 3/4” Screws (114).

59.Wet one end of the Squat Arm (32) with soapy water. Slide a Short Pad (20) onto the Squat Arm as shown.

Slide two Nut Clips (108) onto a Squat Handle (33). Attach the Squat Handle to the Squat Arm (32) with two 5/16” x 3/4” Button Head Screws (51). Slide an Inner Cap w/Hole (111) onto the Squat Handle and press it onto the end of the Squat Arm. Wet the Squat Handle with soapy water. Slide an 8” Handgrip (84) onto the Squat Handle.

Repeat this step with the other end of the Squat Arm (32).

60.Attach the Squat Arm (32) to the Squat Bracket (37) with two 3/8” x 2 1/2” Carriage Bolts (106), two 3/8” Washers (91), and two 3/8” Nylon Locknuts (87).

Do not tighten the Nylon Locknuts yet.

Finish attaching the Squat Arm (32) to the Squat Bracket (37) with a 3/8” x 3” Bolt (107), a 3/8” Washer (91), and a 3/8” Nylon Locknut (87).

Tighten all of the 3/8” Nylon Locknuts (87) used in this step.

20

57

 

 

 

16

 

 

 

 

8

 

 

 

 

97

 

 

 

114

 

 

 

99

 

58

 

 

114

15

 

 

3

 

 

 

114

59

 

20

 

32

 

 

 

 

 

 

51

 

 

 

20

 

 

 

 

108

 

51

108

 

 

 

 

 

 

 

33

 

 

 

111

 

 

84

 

60

107

 

 

87

91

32

 

 

 

91

 

 

 

 

87

106

 

37

 

 

 

Image 20
Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important Precautions DecalOne on each side Before YOU BeginDecal Assembly Frame Assembly Locknut the Squat Knee Rest must be able to pivotLocknuts yet Do not tighten the Nylon Locknuts yetPage Assemble the other weight stack in the same way Open the parts bag labeled ARM Assembly Do not tighten the Locknuts yetCable Assembly Repeat this step with the Left Butterfly ArmTrap is turned to hold the Cable in the groove of the Pulley 100 68 78 101 102 Page Page Page Page Seat Assembly Locate and open the parts bag labeled Seat AssemblyRepeat this step with the other end of the Squat Arm Tighten all of the 3/8 Nylon Locknuts 87 used in this stepPage Adjustments Changing the Weight SettingConverting the Butterfly Arms Ing any exerciseAdjusting the Squat ARM or Swivel Carriage Adjusting the Squat Knee RestLbs Top Weight Resistance ChartStation Troubleshooting Tightening the CablesButterfly Cable Swivel High Cable Squat Cable Cable DiagramsLat Cable Swivel Low Leg LeverSwivel Cable Full 90 DAY Warranty Model NoSEARS, Roebuck and CO., Hoffman ESTATES, IL SEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, ILPage Page Part Identification CHART-Model No R1102A#8 x 3/4 Screw X 7 Bolt Remove this Part LIST/EXPLODED Drawing From the Manual Part LIST-Model No Key Qty DescriptionDRAWING-Model