Miele PW 5065 manual Load the laundry, Close the drum door

Page 10

Using the washer

2. Load the laundry

^Open the drum door using the "Door" button.

The drum light switches on.

^Load the laundry loosely into the drum.

For best results, wash mixed loads of small and large items. This will improve washing effectiveness and help distribute the load evenly.

Note: Overloading the washer will affect wash results and cause wrinkling.

^ Close the drum door.

To prevent damage to the door seal and clothing, make sure that there is nothing caught between the drum door and the seal.

Image 10

Contents Operating manual Washer Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenDisplay with -, OK and + buttons Guide to the washerControl panel Door button+ buttons Temperature conversions Celsius FahrenheitDisplay OK buttonReminder of the shipping struts Before using for the first timeSetting time of day First washSort the laundry Using the washerGeneral tips Load the laundry Close the drum doorSelect a program Delay StartPre-wash Too little detergent may cause Adding detergentToo much detergent may cause Coin mechanism Starting a programAt the end of a program Remove the laundryAdjusting the spin speed Canceling a programAdjusting the temperature Changing a programAdding/removing laundry during a wash program Drum door cannot be opened ifProgram guide Denim 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Dark garments 40C to cold 104C to coldStarch Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F Pillows 95C to 40C 203F to 104FDo not use agents containing paraffin Proofing 40C to 30C 104F to 86FExtra Rinse Grease and fat 95C to 40C 203F to 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Towels short 40C 104FChem. Therm. Dis min 60C 140F Towels + 60C to 40C 140F to 104FCapes 30C 86F HygieneProgram sequence Main wash Rinse SpinSymbols Special features in the program sequence Anti-creaseSelecting a spin speed Starting the delay start Delay StartSetting the delay start Changing the delay startWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning the washer Cleaning and CareCleaning the detergent drawer Cleaning the inlet hose filters Cleaning the inlet hose filterCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedDisplay shows a fault message Display message Possible cause SolutionGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Open the lint trap door Remove the toolMachines with a drain pump Remove the lint trap lid Open the drum doorMachines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsPage Installation Instructions Installation Front viewRear view Removing the shipping struts Installation siteInstallation Do not lift the washer by the drum doorInstallation Pull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Coin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid HeightCold water connection MaintenanceWater connection Extension hosesHot water connection Drain valve DrainageDrain pump Electrical connection Technical Data Disposal of the packing materials Help to protect the environmentDisposal of an old appliance Menu Settings J To adjust standard settings Leaving the Settings menu Settings JAccessing the Settings J Language JDisplay brightness Time of dayDisplay contrast Selecting the clock displayStandby Not in current prog. factory defaultMemory Menu Settings Supervisor level Entering the codeAuto load control Supervisor levelMain wash water Cottons water level Rinse waterLow Water Pressure Minimum Iron water levelPre-wash Minimum Iron durationSpecial programs list Cottons rinsesExternal dosage Leaving the Settings menuMinimum Iron rinses Pre-rinse CottonsAlteration rights reserved