Miele PW 5065 manual Fabric softener, liquid starch, Dye removers / Fabric dyes

Page 27

Detergent

Fabric softener, liquid starch

Fabric softener added to the wash program will make fabrics feel softer and will reduce static cling in the dryer.

Liquid starch is a synthetic starch wash used to give fabrics some stiffness. Starch can be included in any wash program as part of the final rinse.

Automatic dispensing of fabric softener or liquid starch

^Add the fabric softener or liquid starch to compartment §. Do not exceed the Max. level mark.

The softener or liquid starch is auto- matically dispensed in the final rinse. At the end of the program a small amount of water will remain in the fabric softener compartment §.

If you use starch frequently, clean the dispenser compartment and especially the siphon tube and conditioner channel. See "Cleaning the detergent drawer".

Separate fabric softener

^Add the fabric softener to compartment §.

^Select the "Starch" program.

^Press the "Start" button.

Separate powder starch

^Dispense the amount of starch recommended on the packaging.

^Add starch to compartment i.

^Select the "Starch" program.

^Press the "Start" button.

Never mix fabric softener and starch together in the fabric softener compartment §. This will clog the dispenser.

Dye removers / Fabric dyes

Do not use dye removers in this washer.

^When dying fabrics in the washer, adhere to the manufacturer’s instructions.

External dispensing

As an option the washer can be set up to an external detergent dosage system. A conversion kit is necessary which can be purchased from Miele Technical Service.

27

Image 27
Contents Operating manual Washer Contents Technical Safety Important Safety InstructionsUse Children Using accessoriesDoor button Guide to the washerControl panel Display with -, OK and + buttonsOK button Temperature conversions Celsius FahrenheitDisplay + buttonsFirst wash Before using for the first timeSetting time of day Reminder of the shipping strutsUsing the washer Sort the laundryGeneral tips Close the drum door Load the laundryDelay Start Select a programPre-wash Adding detergent Too little detergent may causeToo much detergent may cause Remove the laundry Starting a programAt the end of a program Coin mechanismChanging a program Canceling a programAdjusting the temperature Adjusting the spin speedDrum door cannot be opened if Adding/removing laundry during a wash programProgram guide Dark garments 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Denim 40C to cold 104C to coldPillows 95C to 40C 203F to 104F Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F StarchProofing 40C to 30C 104F to 86F Do not use agents containing paraffinExtra Rinse Towels short 40C 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Grease and fat 95C to 40C 203F to 104FHygiene Towels + 60C to 40C 140F to 104FCapes 30C 86F Chem. Therm. Dis min 60C 140FMain wash Rinse Spin Program sequenceSpecial features in the program sequence Anti-crease SymbolsSelecting a spin speed Changing the delay start Delay StartSetting the delay start Starting the delay startNormal soiling DetergentWater hardness Water softenerDye removers / Fabric dyes Fabric softener, liquid starchCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsDisplay message Possible cause Solution Display shows a fault messageGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Remove the lint trap lidMachines with a drain valve Changing the light bulb Repairs After sales servicePC Update Optional accessoriesPage Installation Instructions Front view InstallationRear view Do not lift the washer by the drum door Installation siteInstallation Removing the shipping strutsPull the shipping strut out Pull out the shipping strut out InstallationInstalling the shipping struts Leveling the washer Height Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Coin mechanismExtension hoses MaintenanceWater connection Cold water connectionHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Language J Settings JAccessing the Settings J Leaving the Settings menuSelecting the clock display Time of dayDisplay contrast Display brightnessNot in current prog. factory default StandbyMemory Entering the code Menu Settings Supervisor levelSupervisor level Auto load controlMain wash water Minimum Iron water level Rinse waterLow Water Pressure Cottons water levelCottons rinses Minimum Iron durationSpecial programs list Pre-washPre-rinse Cottons Leaving the Settings menuMinimum Iron rinses External dosageAlteration rights reserved