Settings J
Time of day
This selection allows the clock to be shown as 24 hours, 12 hours or not at all. The time of day is also set here.
If the clock is not selected the delay start can only be shown as a 24 hour timer. The display will show the timer counting down until the start of the program but not the current time of day.
Selecting the clock display
^Select the desired clock display and confirm.
The display shows the clock setting.
Set the time of day
^Set the hours with the buttons +/– and confirm with OK. Repeat with setting the minutes and confirm. The display changes to "Settings".
Display contrast
The contrast of the display can be set at ten different levels.
It is factory set to Setting 4.
The contrast changes immediately when a different level is selected.
Display brightness
The brightness of the display can be set at ten different levels.
It is factory set to Setting 5.
The brightness changes immediately when a different level is selected.
57