Miele PW 5065 manual Select a program, Pre-wash, Delay Start

Page 11

Using the washer

3. Select a program

^Select a program and the desired temperature with the program selector.

The display shows the selected wash program.

Cottons

The display switches to the program selection.

60°C	1400 rpm
Duration:	0:47 h

^To change the highlighted spin speed use the +/– buttons. Confirm with "OK".

The temperature can also be changed in some programs.

^Hold down the "OK" button until the temperature is highlighted.

^Adjust the temperature with the +/- buttons.

When selecting "Special programs" the display shows the list.

CQuick wash

EShirts

StarchH

^Select the desired program with the buttons +/– and confirm with OK.

The display switches to the program selection.

Shirts

40°C	600 rpm
Duration:	0:37 h

^To change the highlighted temperature use the +/– buttons. Confirm with "OK". The display then switches to the spin speed.

Pre-wash

^Select a Pre-wash for heavily soiled laundry.

If the additional function "Pre-wash" cannot be selected, it is not available for this wash program.

Delay Start

^Select a delayed start if desired. See "Delay Start".

11

Image 11

Contents Operating manual Washer Contents Technical Safety Important Safety InstructionsUse Children Using accessoriesDoor button Guide to the washerControl panel Display with -, OK and + buttonsOK button Temperature conversions Celsius FahrenheitDisplay + buttons First wash Before using for the first time Setting time of day Reminder of the shipping strutsGeneral tips Using the washerSort the laundry Close the drum door Load the laundryPre-wash Delay StartSelect a program Too much detergent may cause Adding detergentToo little detergent may cause Remove the laundry Starting a programAt the end of a program Coin mechanismChanging a program Canceling a programAdjusting the temperature Adjusting the spin speedDrum door cannot be opened if Adding/removing laundry during a wash programProgram guide Dark garments 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Denim 40C to cold 104C to coldPillows 95C to 40C 203F to 104F Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F StarchExtra Rinse Proofing 40C to 30C 104F to 86FDo not use agents containing paraffin Towels short 40C 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Grease and fat 95C to 40C 203F to 104FHygiene Towels + 60C to 40C 140F to 104FCapes 30C 86F Chem. Therm. Dis min 60C 140FMain wash Rinse Spin Program sequenceSpecial features in the program sequence Anti-crease SymbolsSelecting a spin speed Changing the delay start Delay StartSetting the delay start Starting the delay startNormal soiling DetergentWater hardness Water softenerDye removers / Fabric dyes Fabric softener, liquid starchCleaning the detergent drawer Cleaning and CareCleaning the washer Cleaning the filter in the inlet valve Cleaning the inlet hose filterCleaning the inlet hose filters Wash program cannot be started Frequently asked questionsDisplay message Possible cause Solution Display shows a fault messageGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Machines with a drain pump Remove the toolOpen the lint trap door Open the drum door Remove the lint trap lidMachines with a drain valve Changing the light bulb Repairs After sales servicePC Update Optional accessoriesPage Installation Instructions Front view InstallationRear view Do not lift the washer by the drum door Installation siteInstallation Removing the shipping strutsPull the shipping strut out Pull out the shipping strut out InstallationInstalling the shipping struts Leveling the washer Height Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Coin mechanismExtension hoses MaintenanceWater connection Cold water connectionHot water connection Drain pump DrainageDrain valve Electrical connection Technical Data Disposal of an old appliance Help to protect the environmentDisposal of the packing materials Menu Settings J To adjust standard settings Language J Settings JAccessing the Settings J Leaving the Settings menuSelecting the clock display Time of dayDisplay contrast Display brightnessMemory Not in current prog. factory defaultStandby Entering the code Menu Settings Supervisor levelMain wash water Supervisor levelAuto load control Minimum Iron water level Rinse waterLow Water Pressure Cottons water levelCottons rinses Minimum Iron durationSpecial programs list Pre-washPre-rinse Cottons Leaving the Settings menuMinimum Iron rinses External dosageAlteration rights reserved