Miele PW 5065 manual Frequently asked questions, Wash program cannot be started

Page 30

Frequently asked questions

,Repairs to electrical appliances must only be carried out by a qualified and trained person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.

The following section will help you avoid placing a service call by identifying issues you may encounter while operating the machine:

A wash program cannot be started

Issue	Possible cause	Solution
The display and the	The washer has no	Possible fault
program selector	power.	– the washer is connected to
remain dark.		the electrical supply,
		– the circuit breaker has
		tripped.
When selecting the	The instructions in	Follow the instructions as
program	"Before using for the	described in the "Before using
"Drain/Spin" the	first time" were not	for the first time" chapter.
program does not	followed.
start.
The display remains	The machine has gone	Press any button. The Standby
off.	into "Standby" mode.	function will end.
	The display shuts off to
	save energy.

30

Image 30

Contents Operating manual Washer Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenDisplay with -, OK and + buttons Guide to the washerControl panel Door button+ buttons Temperature conversions Celsius FahrenheitDisplay OK buttonReminder of the shipping struts Before using for the first timeSetting time of day First washUsing the washer Sort the laundryGeneral tips Load the laundry Close the drum doorDelay Start Select a programPre-wash Adding detergent Too little detergent may causeToo much detergent may cause Coin mechanism Starting a programAt the end of a program Remove the laundryAdjusting the spin speed Canceling a programAdjusting the temperature Changing a programAdding/removing laundry during a wash program Drum door cannot be opened ifProgram guide Denim 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Dark garments 40C to cold 104C to coldStarch Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F Pillows 95C to 40C 203F to 104FProofing 40C to 30C 104F to 86F Do not use agents containing paraffinExtra Rinse Grease and fat 95C to 40C 203F to 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Towels short 40C 104FChem. Therm. Dis min 60C 140F Towels + 60C to 40C 140F to 104FCapes 30C 86F HygieneProgram sequence Main wash Rinse SpinSymbols Special features in the program sequence Anti-creaseSelecting a spin speed Starting the delay start Delay StartSetting the delay start Changing the delay startWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Frequently asked questions Wash program cannot be startedDisplay shows a fault message Display message Possible cause SolutionGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Remove the lint trap lid Open the drum doorMachines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsPage Installation Instructions Installation Front viewRear view Removing the shipping struts Installation siteInstallation Do not lift the washer by the drum doorInstallation Pull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Coin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid HeightCold water connection MaintenanceWater connection Extension hosesHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Leaving the Settings menu Settings JAccessing the Settings J Language JDisplay brightness Time of dayDisplay contrast Selecting the clock displayNot in current prog. factory default StandbyMemory Menu Settings Supervisor level Entering the codeSupervisor level Auto load controlMain wash water Cottons water level Rinse waterLow Water Pressure Minimum Iron water levelPre-wash Minimum Iron durationSpecial programs list Cottons rinsesExternal dosage Leaving the Settings menuMinimum Iron rinses Pre-rinse CottonsAlteration rights reserved