Miele PW 5065 manual Children, Using accessories

Page 5

IMPORTANT SAFETY INSTRUCTIONS

If the correct amount of detergent is dispensed, the machine should not need to be descaled. If the washer

needs to be descaled, use a descaling agent with corrosion protection. These special descaling agents can be purchased from the Miele Service department. Use as directed.

Never use solvent based cleaning agents in this machine, this may

result in damage and create toxic fumes. They will present a fire and explosion hazard.

Items which have been pre-treated in solvent based cleaning agents

must be thoroughly rinsed in clean water before being washed in the machine.

Only use dyes specified by the manufacturer as being suitable for

use in a washing machine. Use as directed by the manufacturer.

Dye removers may contain sulphur compounds which cause damage

such as corrosion. Do not use dye removers in this machine.

The drum door glass will be hot when washing at very high

temperatures. Do not touch the glass. Danger of burns!

The stainless steel casing must not come in contact with liquid

cleaning or disinfection agents containing chlorine. They may cause corrosion. Do not store open containers of this agent next to the machine.

Children

Close supervision is necessary when the appliance is used near

children. Do not allow children to play on or in the appliance.

Using accessories

Accessories must only be installed once approved by Miele. Installing

unapproved parts may void the warranty and product liability.

5

Image 5
Contents Operating manual Washer Contents Technical Safety Important Safety InstructionsUse Children Using accessoriesControl panel Guide to the washerDisplay with -, OK and + buttons Door buttonDisplay Temperature conversions Celsius Fahrenheit+ buttons OK buttonSetting time of day Before using for the first timeReminder of the shipping struts First washGeneral tips Using the washerSort the laundry Close the drum door Load the laundryPre-wash Delay StartSelect a program Too much detergent may cause Adding detergentToo little detergent may cause At the end of a program Starting a programCoin mechanism Remove the laundryAdjusting the temperature Canceling a programAdjusting the spin speed Changing a programDrum door cannot be opened if Adding/removing laundry during a wash programProgram guide Curtains 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FDenim 40C to cold 104C to cold Dark garments 40C to cold 104C to coldShirts 60C to 40C 140F to 104F Special programs Quick wash 40C 104FStarch Pillows 95C to 40C 203F to 104FExtra Rinse Proofing 40C to 30C 104F to 86FDo not use agents containing paraffin Flour 95C to 40C 203F to 104F Intensive Wash 60C to 40C 140F to 104FGrease and fat 95C to 40C 203F to 104F Towels short 40C 104FCapes 30C 86F Towels + 60C to 40C 140F to 104FChem. Therm. Dis min 60C 140F HygieneMain wash Rinse Spin Program sequenceSpecial features in the program sequence Anti-crease SymbolsSelecting a spin speed Setting the delay start Delay StartStarting the delay start Changing the delay startWater hardness DetergentWater softener Normal soilingDye removers / Fabric dyes Fabric softener, liquid starchCleaning the detergent drawer Cleaning and CareCleaning the washer Cleaning the filter in the inlet valve Cleaning the inlet hose filterCleaning the inlet hose filters Wash program cannot be started Frequently asked questionsDisplay message Possible cause Solution Display shows a fault messageGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Machines with a drain pump Remove the toolOpen the lint trap door Open the drum door Remove the lint trap lidMachines with a drain valve Changing the light bulb PC Update After sales serviceOptional accessories RepairsPage Installation Instructions Front view InstallationRear view Installation Installation siteRemoving the shipping struts Do not lift the washer by the drum doorPull the shipping strut out Pull out the shipping strut out InstallationInstalling the shipping struts Leveling the washer Reinstallation of the machine lid Washer/ Dryer Stack Installation on a baseCoin mechanism HeightWater connection MaintenanceCold water connection Extension hosesHot water connection Drain pump DrainageDrain valve Electrical connection Technical Data Disposal of an old appliance Help to protect the environmentDisposal of the packing materials Menu Settings J To adjust standard settings Accessing the Settings J Settings JLeaving the Settings menu Language JDisplay contrast Time of dayDisplay brightness Selecting the clock displayMemory Not in current prog. factory defaultStandby Entering the code Menu Settings Supervisor levelMain wash water Supervisor levelAuto load control Low Water Pressure Rinse waterCottons water level Minimum Iron water levelSpecial programs list Minimum Iron durationPre-wash Cottons rinsesMinimum Iron rinses Leaving the Settings menuExternal dosage Pre-rinse CottonsAlteration rights reserved