Miele PW 5065 Minimum Iron rinses, External dosage, Pre-rinse Cottons, Pre-rinse Minimum Iron

Page 63

Menu Settings - Supervisor level

MINIMUM IRON rinses

The program "MINIMUM IRON" allows you to change the number of rinses.

2 rinses (factory set)

3rinses

4rinses

External dosage

The washer is set for connection to an external detergent dosage system. To use the external dosage system the setting must be adjusted/set accordingly.

The machine comes factory set with this option turned off.

Pre-rinse COTTONS

The program "COTTONS" allows a pre-rinse of the laundry.

The machine comes factory set with this option turned off.

Pre-rinse MINIMUM IRON

The program "MINIMUM IRON" allows a pre-rinse of the laundry.

The machine comes factory set with this option turned off.

Spin - free of charge

When operated by a coin mechanism, the program "Spin" can be offered free of charge.

The machine comes factory set with this option turned off.

Leaving the Settings menu

^Press "back" and confirm with OK. The display shows the main menu.

Image 63

Contents Operating manual Washer Contents Technical Safety Important Safety InstructionsUse Children Using accessoriesDoor button Guide to the washerControl panel Display with -, OK and + buttonsOK button Temperature conversions Celsius FahrenheitDisplay + buttonsFirst wash Before using for the first timeSetting time of day Reminder of the shipping strutsUsing the washer Sort the laundryGeneral tips Close the drum door Load the laundryDelay Start Select a programPre-wash Adding detergent Too little detergent may causeToo much detergent may cause Remove the laundry Starting a programAt the end of a program Coin mechanismChanging a program Canceling a programAdjusting the temperature Adjusting the spin speedDrum door cannot be opened if Adding/removing laundry during a wash programProgram guide Dark garments 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Denim 40C to cold 104C to coldPillows 95C to 40C 203F to 104F Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F StarchProofing 40C to 30C 104F to 86F Do not use agents containing paraffinExtra Rinse Towels short 40C 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Grease and fat 95C to 40C 203F to 104FHygiene Towels + 60C to 40C 140F to 104FCapes 30C 86F Chem. Therm. Dis min 60C 140FMain wash Rinse Spin Program sequenceSpecial features in the program sequence Anti-crease SymbolsSelecting a spin speed Changing the delay start Delay StartSetting the delay start Starting the delay startNormal soiling DetergentWater hardness Water softenerDye removers / Fabric dyes Fabric softener, liquid starchCleaning and Care Cleaning the washerCleaning the detergent drawer Cleaning the inlet hose filter Cleaning the inlet hose filtersCleaning the filter in the inlet valve Wash program cannot be started Frequently asked questionsDisplay message Possible cause Solution Display shows a fault messageGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Remove the tool Open the lint trap doorMachines with a drain pump Open the drum door Remove the lint trap lidMachines with a drain valve Changing the light bulb Repairs After sales servicePC Update Optional accessoriesPage Installation Instructions Front view InstallationRear view Do not lift the washer by the drum door Installation siteInstallation Removing the shipping strutsPull the shipping strut out Pull out the shipping strut out InstallationInstalling the shipping struts Leveling the washer Height Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid Coin mechanismExtension hoses MaintenanceWater connection Cold water connectionHot water connection Drainage Drain valveDrain pump Electrical connection Technical Data Help to protect the environment Disposal of the packing materialsDisposal of an old appliance Menu Settings J To adjust standard settings Language J Settings JAccessing the Settings J Leaving the Settings menuSelecting the clock display Time of dayDisplay contrast Display brightnessNot in current prog. factory default StandbyMemory Entering the code Menu Settings Supervisor levelSupervisor level Auto load controlMain wash water Minimum Iron water level Rinse waterLow Water Pressure Cottons water levelCottons rinses Minimum Iron durationSpecial programs list Pre-washPre-rinse Cottons Leaving the Settings menuMinimum Iron rinses External dosageAlteration rights reserved