Miele Step-by-Step Guide to Canceling a Program on Washing Machines

Page 14

Using the washer

The program will be locked

3 minutes after the program has started when the washer is operated with a coin mechanism. Canceling or changing a program is no longer possible.

Canceling a program

A program can be canceled any time after a program has started.

^Turn the program selector to "End".

The washer drains the wash water away and the program is canceled.

^Press the "Door" button.

^Remove the laundry.

or

^Close the door and start a new program.

Changing a program

To change a program

A program change is not possible after a program has started.

To select a different program, the started program must be canceled.

Adjusting the temperature

Some programs allow you to change the temperatures up to 5 minutes after the start.

^Press OK.

The temperature is highlighted.

^To change the highlighted temperature use the +/– buttons. Confirm with "OK".

Adjusting the spin speed

^Press OK until the spin speed is highlighted. Adjust the spin speed with the +/– buttons. Adjustment is possible until the start of the final spin.

Selection of the "Pre-wash" is not possible after the program has started.

14

Image 14

Contents Operating manual Washer Contents Important Safety Instructions Technical SafetyUse Using accessories ChildrenDisplay with -, OK and + buttons Guide to the washerControl panel Door button+ buttons Temperature conversions Celsius FahrenheitDisplay OK buttonReminder of the shipping struts Before using for the first timeSetting time of day First washGeneral tips Using the washerSort the laundry Load the laundry Close the drum doorPre-wash Delay StartSelect a program Too much detergent may cause Adding detergentToo little detergent may cause Coin mechanism Starting a programAt the end of a program Remove the laundryAdjusting the spin speed Canceling a programAdjusting the temperature Changing a programAdding/removing laundry during a wash program Drum door cannot be opened ifProgram guide Denim 40C to cold 104C to cold Bed linen 60C to 40C 140F to 104FCurtains 40C to cold 104C to cold Dark garments 40C to cold 104C to coldStarch Special programs Quick wash 40C 104FShirts 60C to 40C 140F to 104F Pillows 95C to 40C 203F to 104FExtra Rinse Proofing 40C to 30C 104F to 86FDo not use agents containing paraffin Grease and fat 95C to 40C 203F to 104F Intensive Wash 60C to 40C 140F to 104FFlour 95C to 40C 203F to 104F Towels short 40C 104FChem. Therm. Dis min 60C 140F Towels + 60C to 40C 140F to 104FCapes 30C 86F HygieneProgram sequence Main wash Rinse SpinSymbols Special features in the program sequence Anti-creaseSelecting a spin speed Starting the delay start Delay StartSetting the delay start Changing the delay startWater softener DetergentWater hardness Normal soilingFabric softener, liquid starch Dye removers / Fabric dyesCleaning the detergent drawer Cleaning and CareCleaning the washer Cleaning the filter in the inlet valve Cleaning the inlet hose filterCleaning the inlet hose filters Frequently asked questions Wash program cannot be startedDisplay shows a fault message Display message Possible cause SolutionGeneral problems with the washer Poor wash results Door will not open when the Door button is pressed Machines with a drain pump Remove the toolOpen the lint trap door Remove the lint trap lid Open the drum doorMachines with a drain valve Changing the light bulb Optional accessories After sales servicePC Update RepairsPage Installation Instructions Installation Front viewRear view Removing the shipping struts Installation siteInstallation Do not lift the washer by the drum doorInstallation Pull the shipping strut out Pull out the shipping strut outInstalling the shipping struts Leveling the washer Coin mechanism Washer/ Dryer Stack Installation on a baseReinstallation of the machine lid HeightCold water connection MaintenanceWater connection Extension hosesHot water connection Drain pump DrainageDrain valve Electrical connection Technical Data Disposal of an old appliance Help to protect the environmentDisposal of the packing materials Menu Settings J To adjust standard settings Leaving the Settings menu Settings JAccessing the Settings J Language JDisplay brightness Time of dayDisplay contrast Selecting the clock displayMemory Not in current prog. factory defaultStandby Menu Settings Supervisor level Entering the codeMain wash water Supervisor levelAuto load control Cottons water level Rinse waterLow Water Pressure Minimum Iron water levelPre-wash Minimum Iron durationSpecial programs list Cottons rinsesExternal dosage Leaving the Settings menuMinimum Iron rinses Pre-rinse CottonsAlteration rights reserved