Miele 09 900 700 operating instructions Correct use

Page 10

Warning and Safety instructions

Correct use

Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.

Before using the machine for the first time, check that the transit bars at the rear of the machine have been removed (see "Installation and connection - Removing the transit bars"). During spinning, a transit bar which is still in place may result in damage to both the machine and adjacent furniture or appliances.

Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity.

Flooding danger.

If hooking the drain hose into a wash basin, check that the water can drain off quickly enough to prevent the sink from overflowing. Make sure the drain hose is secure, so that the force of the water flowing out of the hose does not dislodge it.

Take care to ensure that foreign objects (e.g. nails, pins, coins, paper clips) do not find their way into the machine with the laundry. These may damage components of the machine (e.g. suds container, drum), which in turn can result in damage to the laundry.

10

Image 10
Contents Operating instructions for washing machines Disposal of the packing mate‐ rial Caring for the environmentDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentPre-treat stains Prepare the laundrySort the laundry General tipsSelect a programme Switch on the washing ma‐ chineProgramme selection Open the door Load the washing machineClose the door Select an extra options Select programme settingsSelect a spin speed Add detergent Start the programme Start the programme the end of a programmeAt the end of a programme Pre-wash Extra optionsShort SoakRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdMinimum iron 60C to 20C Max. load 3.5 kg Cottons 30C to 90C Max. load 7.0 kgCottons Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning the detergent dis‐ penser drawer Cleaning and careCleaning the drum External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Excessive foam has built up during washing Programme using a temperature above 60C hasWashing machine has detected a fault during Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Door will not open Problem Cause and remedy Drum door cannotBe opened by pressing Procedure for draining the washing machine Blocked drain outletOpening the door Guarantee Other countries After sales serviceGuarantee U.K Optional accessoriesInstallation and connection Front viewRear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a continuous work‐ top/ in a kitchen run Washer-dryer stackPlease note Inlet hose Electronic unit and washing machine housingWater protection system Drain hoseConnection to the water sup‐ ply MaintenanceExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Water plus system Programmable functionsFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Detergent Optional accessoriesSpecialist detergents Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700