Miele 09 900 700 operating instructions Garment care label symbols

Page 30

Garment care label symbols

Washing

The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.

No bar under the symbol: = normal agitation

One bar under the symbol: = reduced agitation

Two bars under the symbol: = much reduced agitation

Hand wash (if no temperature is specified, use the lowest temperature or cold)

Do not wash

Programme selection examples

Programme

Garment care la

 

bel symbols

Cottons



 

Minimum iron



Automatic plus



Express 20

Woollens 

Delicates



Drying

The number of dots indicates the drying temperature

Normal temperature  Low temperature  Do not tumble dry

Ironing

The number of dots indicates the ironing temperature

Hot iron (max. sole plate temp. approx. 200°C)

Medium hot iron (max. sole plate temp. approx. 150°C)

Cool iron (max. sole plate temp. approx. 110°C).

Do not steam iron garments carrying this symbol as this could cause irreversible damage.

Do not iron

Professional cleaning

Dry clean only. The letters indi

cate the type of cleaning agent required.

Professional Wet Clean only  Do not dry clean

Bleaching

Any oxidising bleaching agent can be used

Only use an oxygen based bleach or a non-chlorine bleach

Do not bleach

30

Image 30 Contents
Operating instructions for washing machines Caring for the environment Disposal of the packing mate‐ rialDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentPre-treat stains Prepare the laundrySort the laundry General tipsSwitch on the washing ma‐ chine Select a programmeProgramme selection Load the washing machine Open the doorClose the door Select programme settings Select an extra optionsSelect a spin speed Add detergent Start the programme the end of a programme Start the programmeAt the end of a programme Pre-wash Extra optionsShort SoakRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdMinimum iron 60C to 20C Max. load 3.5 kg Cottons 30C to 90C Max. load 7.0 kgCottons Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning the detergent dis‐ penser drawer Cleaning and careCleaning the drum External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Excessive foam has built up during washing Programme using a temperature above 60C hasWashing machine has detected a fault during Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Problem Cause and remedy Drum door cannot Door will not openBe opened by pressing Procedure for draining the washing machine Blocked drain outletOpening the door Guarantee Other countries After sales serviceGuarantee U.K Optional accessoriesInstallation and connection Front viewRear view Installation surface Transporting the washing machine to its installation siteRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher-dryer stack Building under a continuous work‐ top/ in a kitchen runPlease note Inlet hose Electronic unit and washing machine housingWater protection system Drain hoseMaintenance Connection to the water sup‐ plyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Programmable functions Water plus systemFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Optional accessories DetergentSpecialist detergents Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700