Installation and connection
Connection to the water sup‐ ply
The washing machine should be con‐ nected to a mains water supply in ac‐ cordance with current local and nation‐ al safety regulations. The German au‐ thorities do not require it to have a non- return valve as the washing machine has been designed to comply with DIN regulations.
The machine is designed to operate with a flow pressure of between 100 and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a pressure re‐ ducing valve.
Connection to the mains water supply should incorporate a mains stopcock
with 3/4" threaded union. The stopcock should be fitted by a qualified plumber.
The connection point is subject to mains water pressure. Turn on the stopcock slowly and check for leaks. Correct the position of the washer and union if appropriate.
The washing machine is not suitable for connection to a hot water supply.
Maintenance
Only use a genuine Miele hose should you ever need a replacement or exten‐ sion. These are tested to withstand pressure of at least 7,000 kPa.
In order to protect the water inlet valve, the two dirt filters (one in the open end of the inlet hose, the other in the inlet point in the machine) must not be removed.
Extension hose
Longer hoses 2.5 or 4.0 m in length are available from your Miele Dealer or Miele as optional extras.
57