Miele 09 900 700 Start the programme the end of a programme, At the end of a programme

Page 22

6. Start the programme - the end of a programme

Start the programme.

Press the flashing Start button.

At the end of a programme

When the programme has finished the Anti-crease/Finishindicator light will light up in the programme sequence display and an 0 will appear in the dis‐ play.

The washing machine will switch off automatically 15 minutes after the end of the anti-crease phase. Press the  button to switch it back on again.

Press the Door button to open the door.

Remove the laundry.

Check that all items have been re‐ moved from the drum. Items left in the drum could discolour other items in the next wash or become discol‐ oured themselves.

Check the folds in the door seal for any small articles, e.g. buttons, which might be lodged there.

Switch the washing machine off with the  button and turn the pro‐ gramme selector to Finish.

Close the door. Otherwise there is a danger of objects being placed inad‐ vertently in the drum. If these re‐ mained unnoticed and were washed in the next load, they could damage the laundry.

22

Image 22

Contents Operating instructions for washing machines Disposal of the packing mate‐ rial Caring for the environmentDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentPre-treat stains Prepare the laundrySort the laundry General tipsSelect a programme Switch on the washing ma‐ chineProgramme selection Open the door Load the washing machineClose the door Select an extra options Select programme settingsSelect a spin speed Add detergent Start the programme Start the programme the end of a programmeAt the end of a programme Pre-wash Extra optionsShort SoakRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdMinimum iron 60C to 20C Max. load 3.5 kg Cottons 30C to 90C Max. load 7.0 kgCottons Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning the detergent dis‐ penser drawer Cleaning and careCleaning the drum External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Excessive foam has built up during washing Programme using a temperature above 60C hasWashing machine has detected a fault during Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Door will not open Problem Cause and remedy Drum door cannotBe opened by pressing Procedure for draining the washing machine Blocked drain outletOpening the door Guarantee Other countries After sales serviceGuarantee U.K Optional accessoriesInstallation and connection Front viewRear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a continuous work‐ top/ in a kitchen run Washer-dryer stackPlease note Inlet hose Electronic unit and washing machine housingWater protection system Drain hoseConnection to the water sup‐ ply MaintenanceExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Water plus system Programmable functionsFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Detergent Optional accessoriesSpecialist detergents Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700