Miele 09 900 700 operating instructions Operating the washing machine, Control panel

Page 13

Operating the washing machine

Control panel

aDisplay

See the next page for more information.

bStart button

For starting the wash programme.

cExtra option buttons

For selecting extra options. Use the upper button to select either Short, Pre-washor Soak. Use the lower button to select Water plus. Indicator light on = option selected Indicator light off = option not selected

dSpin button with spin speed indicator lights

For selecting the spin speed.

eProgramme selector

For selecting the wash programme and temperature for that programme. The programme selector can be turned clockwise or anti-clockwise.

fProgramme sequence indicator lights

Show which stage of the programme has been reached.

gCheck / Fault indicator lights

see "Problem solving guide".

The PC check light is also used by service technicians to run diagnostic checks and may be used to update programming data in the future.

h  button

For switching the washing machine on and off.

To save energy the washing machine will switch off automatically 15 minutes after the end of the programme/anti-crease phase or after being switched on if no other selection is made.

iDoor button

For opening the door.

13

Image 13
Contents Operating instructions for washing machines Disposal of the packing mate‐ rial Caring for the environmentDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Control panel Operating the washing machineProgrammable functions Running the first programme Before using for the first timeWashing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentSort the laundry Prepare the laundryPre-treat stains General tipsSelect a programme Switch on the washing ma‐ chineProgramme selection Open the door Load the washing machineClose the door Select an extra options Select programme settingsSelect a spin speed Add detergent Start the programme Start the programme the end of a programmeAt the end of a programme Short Extra optionsPre-wash SoakFinal spin speed SpinningRinse and interim spin To omit the final spin Rinse holdCottons Cottons 30C to 90C Max. load 7.0 kgMinimum iron 60C to 20C Max. load 3.5 kg Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Main wash Rinses Spinning Programme sequenceSpecial features in the pro‐ gramme sequence Garment care label symbols Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Colour run and dye removers/ dyes Adding fabric conditioner or liquid starch separatelyCleaning the drum Cleaning and careCleaning the detergent dis‐ penser drawer External casing and fascia panelCleaning and care To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideWash programme stops and a fault indicator light comes on Washing machine has detected a fault during Programme using a temperature above 60C hasExcessive foam has built up during washing Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Door will not open Problem Cause and remedy Drum door cannotBe opened by pressing Blocked drain outlet Procedure for draining the washing machineOpening the door Guarantee U.K After sales serviceGuarantee Other countries Optional accessoriesFront view Installation and connectionRear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetBuilding under a continuous work‐ top/ in a kitchen run Washer-dryer stackPlease note Water protection system Electronic unit and washing machine housingInlet hose Drain hoseConnection to the water sup‐ ply MaintenanceExtension hose Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSTechnical data Consumption data Water plus system Programmable functionsFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Detergent Optional accessoriesSpecialist detergents Machine care products Fabric carePage Page United Kingdom WDA En-GB Nr 900 700