Miele 09 900 700 Adding or removing laundry af‐ ter the programme has started

Page 32

Changing the programme sequence

Adding or removing laundry af‐ ter the programme has started

Press the Door button until the door opens.

Add or remove items.

Close the door.

The programme will continue automati‐ cally.

Please note:

Once a programme has started the washing machine cannot recognise any adjustment to the load.

For this reason, if laundry is added or removed after the start of a programme, the machine will always complete the programme cycle assuming a full load

This can lead to an increase in the time left displayed.

The door cannot be opened, if:

–the suds temperature is above 55°C.

–the water is above a certain level.

–the final spin is being carried out.

32

Image 32

Contents Operating instructions for washing machines Disposal of your old machine Caring for the environmentDisposal of the packing mate‐ rial Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeWhen drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentPrepare the laundry Sort the laundryPre-treat stains General tipsProgramme selection Switch on the washing ma‐ chineSelect a programme Close the door Load the washing machineOpen the door Select a spin speed Select programme settingsSelect an extra options Add detergent At the end of a programme Start the programme the end of a programmeStart the programme Extra options ShortPre-wash SoakSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdCottons 30C to 90C Max. load 7.0 kg CottonsMinimum iron 60C to 20C Max. load 3.5 kg Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning and care Cleaning the drumCleaning the detergent dis‐ penser drawer External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Programme using a temperature above 60C has Washing machine has detected a fault duringExcessive foam has built up during washing Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Be opened by pressing Problem Cause and remedy Drum door cannotDoor will not open Procedure for draining the washing machine Blocked drain outletOpening the door After sales service Guarantee U.KGuarantee Other countries Optional accessoriesInstallation and connection Front viewRear view Removing the transit bars Installation surfaceTransporting the washing machine to its installation site Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machinePlease note Washer-dryer stackBuilding under a continuous work‐ top/ in a kitchen run Electronic unit and washing machine housing Water protection systemInlet hose Drain hoseExtension hose MaintenanceConnection to the water sup‐ ply Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Follow steps  to  to programme and store in memory Programmable functionsWater plus system Gentle action Suds cooling Memory Soak duration Specialist detergents Optional accessoriesDetergent Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700