Miele 09 900 700 operating instructions Wash programme stops and a fault indicator light comes on

Problem solving guide

The wash programme stops and a fault indicator light comes on.

Problem	Cause and remedy
The Check drainage	The water outlet is blocked.
fault indicator light	 Clean the drain filter and the drain pump as de‐
flashes and a fault num‐	scribed in "Problem solving guide – Opening the
ber appears in the dis‐	drum door in the event of a blocked water outlet
play.	and/or a power failure".
	The drain hose has been fixed too high.
	 The maximum delivery head is 1 m.
The Check inlet fault in‐	The water inlet is blocked.
dicator light flashes and	 Open the stopcock.
a fault number appears
	The filter in the water inlet hose is dirty.
in the display.	 Clean the filter.
The Check inlet and	The water protection system has reacted.
Check drainage fault in‐	 Close the stopcock.
dicator lights flash and	 Call the Miele Service Department.
a fault number appears
in the display.
The Soak/Pre-wash or	There is a fault.
Rinses flash and a fault	 Start the programme again. If the fault indicator
number appears in the	comes on again, call the Miele Service Depart‐
display.	ment.

To switch off the fault indicator: Switch the washing machine off with the  button and turn the programme selector to Finish.

41