Miele 09 900 700 operating instructions Programme using a temperature above 60C has

Page 42

Problem solving guide

A check or fault indicator light comes on but the wash programme continues as normal.

Problem	Cause and remedy
The Hygiene info check	A programme using a temperature above 60°C has
indicator light comes	not been run for a long time.
on.	 In order to prevent bacteria and unpleasant
	odours building up in the machine, run the Cot‐
	tons 90°C using powder detergent.

The Check dosage	Excessive foam has built up during washing.
check indicator light	 Use less detergent next time, and follow the man‐
comes on.	ufacturer's recommended dosage amounts on the
	packaging.

The Main wash or Rin‐	The washing machine has detected a fault during the
ses indicator lights	wash programme.
flash in the programme	 Start the programme again. If the fault indicator
sequence display and a	comes on again, call the Miele Service Depart‐
fault number appears in	ment.
the display.

The Anti-crease/Finish	The programme selector was moved to another posi‐
indicator light flashes in	tion after the programme had started.
the programme se‐	 Turn the programme selector back to the original
quence display.	position.

To switch off the fault indicator: Switch the washing machine off with the  button and turn the programme selector to Finish.

The check indicator lights come on at the end of a programme and when the washing machine is switched on.

42

Image 42

Contents Operating instructions for washing machines Caring for the environment Disposal of the packing mate‐ rialDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeEnergy and water consumption When drying with a tumble dryerWashing environmentally and economically DetergentPre-treat stains Prepare the laundrySort the laundry General tipsSwitch on the washing ma‐ chine Select a programmeProgramme selection Load the washing machine Open the doorClose the door Select programme settings Select an extra optionsSelect a spin speed Add detergent Start the programme the end of a programme Start the programmeAt the end of a programme Pre-wash Extra optionsShort SoakRinse and interim spin SpinningFinal spin speed To omit the final spin Rinse holdMinimum iron 60C to 20C Max. load 3.5 kg Cottons 30C to 90C Max. load 7.0 kgCottons Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Interrupting a programme Cancelling a programmeChanging the programme sequence Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning the detergent dis‐ penser drawer Cleaning and careCleaning the drum External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Excessive foam has built up during washing Programme using a temperature above 60C hasWashing machine has detected a fault during Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Problem Cause and remedy Drum door cannot Door will not openBe opened by pressing Procedure for draining the washing machine Blocked drain outletOpening the door Guarantee Other countries After sales serviceGuarantee U.K Optional accessoriesInstallation and connection Front viewRear view Installation surface Transporting the washing machine to its installation siteRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher-dryer stack Building under a continuous work‐ top/ in a kitchen runPlease note Inlet hose Electronic unit and washing machine housingWater protection system Drain hoseMaintenance Connection to the water sup‐ plyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Programmable functions Water plus systemFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Optional accessories DetergentSpecialist detergents Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700