Miele 09 900 700 operating instructions Adding fabric conditioner or liquid starch separately

Page 36

Detergent

Dispensing fabric conditioner and liquid starch at the end of the programme

Add the fabric conditioner or liquid starch to the  compartment. Do not exceed the maximum level mark.

The agent will be automatically dispensed in the last rinse. At the end of the programme a small amount of water will remain in the  compartment.

If starching frequently, thoroughly clean the dispenser compartment, especially the siphon tube regularly.

Adding fabric conditioner or liquid starch separately

Prepare the starch in accordance with the manufacturer's instructions on the packaging.

Add fabric conditioner to the  compartment.

Add liquid starch to the  compartment and powder or viscous starch to the  compartment.

Select the Separate rinse/Starch programme.

Change the spin speed if necessary.

Press the Start button.

Colour run and dye removers/ dyes

Do not use colour run or dye removers in this washing machine. They can cause corrosion in the machine.

Dyes suitable for use in domestic washing machines can be used. However, please note that the salt used in the dyeing process can cause corrosion to stainless steel components in the machine if you dye frequently. Always observe the manufacturer's instructions carefully.

36

Image 36
Contents Operating instructions for washing machines Caring for the environment Disposal of the packing mate‐ rialDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeWhen drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentPrepare the laundry Sort the laundryPre-treat stains General tipsSwitch on the washing ma‐ chine Select a programmeProgramme selection Load the washing machine Open the doorClose the door Select programme settings Select an extra optionsSelect a spin speed Add detergent Start the programme the end of a programme Start the programmeAt the end of a programme Extra options ShortPre-wash SoakSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdCottons 30C to 90C Max. load 7.0 kg CottonsMinimum iron 60C to 20C Max. load 3.5 kg Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning and care Cleaning the drumCleaning the detergent dis‐ penser drawer External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Programme using a temperature above 60C has Washing machine has detected a fault duringExcessive foam has built up during washing Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Problem Cause and remedy Drum door cannot Door will not openBe opened by pressing Procedure for draining the washing machine Blocked drain outletOpening the door After sales service Guarantee U.KGuarantee Other countries Optional accessoriesInstallation and connection Front viewRear view Installation surface Transporting the washing machine to its installation siteRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineWasher-dryer stack Building under a continuous work‐ top/ in a kitchen runPlease note Electronic unit and washing machine housing Water protection systemInlet hose Drain hoseMaintenance Connection to the water sup‐ plyExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Programmable functions Water plus systemFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Optional accessories DetergentSpecialist detergents Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700