Miele 09 900 700 operating instructions Installation and connection

Page 52

Installation and connection

Using the spanner supplied, turn the left-hand transit bar 90°, then

pull the transit bar out.

Turn the right-hand transit bar 90°, then

pull the transit bar out.

52

Image 52

Contents Operating instructions for washing machines Disposal of the packing mate‐ rial Caring for the environmentDisposal of your old machine Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Operating the washing machine Control panelProgrammable functions Before using for the first time Running the first programmeWhen drying with a tumble dryer Washing environmentally and economicallyEnergy and water consumption DetergentPrepare the laundry Sort the laundryPre-treat stains General tipsSelect a programme Switch on the washing ma‐ chineProgramme selection Open the door Load the washing machineClose the door Select an extra options Select programme settingsSelect a spin speed Add detergent Start the programme Start the programme the end of a programmeAt the end of a programme Extra options ShortPre-wash SoakSpinning Final spin speedRinse and interim spin To omit the final spin Rinse holdCottons 30C to 90C Max. load 7.0 kg CottonsMinimum iron 60C to 20C Max. load 3.5 kg Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Programme sequence Main wash Rinses SpinningSpecial features in the pro‐ gramme sequence Garment care label symbols Cancelling a programme Changing the programme sequenceInterrupting a programme Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Adding fabric conditioner or liquid starch separately Colour run and dye removers/ dyesCleaning and care Cleaning the drumCleaning the detergent dis‐ penser drawer External casing and fascia panelCleaning and care Cleaning the water inlet filters To clean the filter in the water inlet valveProblem solving guide Programme does not startWash programme stops and a fault indicator light comes on Programme using a temperature above 60C has Washing machine has detected a fault duringExcessive foam has built up during washing Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Door will not open Problem Cause and remedy Drum door cannotBe opened by pressing Procedure for draining the washing machine Blocked drain outletOpening the door After sales service Guarantee U.KGuarantee Other countries Optional accessoriesInstallation and connection Front viewRear view Transporting the washing machine to its installation site Installation surfaceRemoving the transit bars Installation and connection Re-fitting the transit bars Screwing out and adjusting the feet Levelling the machineBuilding under a continuous work‐ top/ in a kitchen run Washer-dryer stackPlease note Electronic unit and washing machine housing Water protection systemInlet hose Drain hoseConnection to the water sup‐ ply MaintenanceExtension hose Connection to the drainage system Drain hose connectionNon-rewireable plugs BS Electrical connection U.KTechnical data Consumption data Water plus system Programmable functionsFollow steps  to  to programme and store in memory Gentle action Suds cooling Memory Soak duration Detergent Optional accessoriesSpecialist detergents Fabric care Machine care productsPage Page United Kingdom WDA En-GB Nr 900 700