Miele 09 900 700 operating instructions Special features in the pro‐ gramme sequence

Page 29

Programme sequence

= Low water level  = Medium water level  = High water level  = Intensive rhythm  = Normal rhythm

 = Gentle rhythm  = Sensitive rhythm

 = Ultra sensitive rhythm  = Handwash rhythm  = Carried out

– = Not carried out

The washing machine has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate.

The programme sequences shown in the chart are based on the standard programme with a full load. Extra options which can be selected have not been taken into account.

Special features in the programme sequence

Anti-crease:

At the end of the programme the drum continues to turn at intervals for up to 30 minutes to help prevent creasing.

Exception: There is no anti-crease phase in the Woollens programme. The door can be opened at any time during the anti-crease phase.

1)A second rinse is carried out when a temperature of 60°C and above has been selected. A third rinse is carried out when a temperature below 60°C is selected.

2)A third or fourth rinse is carried out if:

– there is too much foam in the drum

a spin speed lower than 700 rpm has been selected

 is selected

3)A third rinse is carried out if:

–  is selected

29

Image 29
Contents Operating instructions for washing machines Disposal of your old machine Caring for the environmentDisposal of the packing mate‐ rial Contents Contents Contents Correct application Safety with children Page Page Correct use Page Accessories Control panel Operating the washing machineProgrammable functions Running the first programme Before using for the first timeWashing environmentally and economically When drying with a tumble dryerEnergy and water consumption DetergentSort the laundry Prepare the laundryPre-treat stains General tipsProgramme selection Switch on the washing ma‐ chineSelect a programme Close the door Load the washing machineOpen the door Select a spin speed Select programme settingsSelect an extra options Add detergent At the end of a programme Start the programme the end of a programmeStart the programme Short Extra optionsPre-wash SoakFinal spin speed SpinningRinse and interim spin To omit the final spin Rinse holdCottons Cottons 30C to 90C Max. load 7.0 kgMinimum iron 60C to 20C Max. load 3.5 kg Automatic plus 40C Max. load 5.0 kgProgramme chart Separate rinse / Starch Max. load 7.0 kg Main wash Rinses Spinning Programme sequenceSpecial features in the pro‐ gramme sequence Garment care label symbols Changing the programme sequence Cancelling a programmeInterrupting a programme Changing a programmeAdding or removing laundry af‐ ter the programme has started Detergent Miele recommended detergents Detergent Colour run and dye removers/ dyes Adding fabric conditioner or liquid starch separatelyCleaning the drum Cleaning and careCleaning the detergent dis‐ penser drawer External casing and fascia panelCleaning and care To clean the filter in the water inlet valve Cleaning the water inlet filtersProgramme does not start Problem solving guideWash programme stops and a fault indicator light comes on Washing machine has detected a fault during Programme using a temperature above 60C hasExcessive foam has built up during washing Programme selector was moved to another posi‐General problems with the washing machine An unsatisfactory wash result Be opened by pressing Problem Cause and remedy Drum door cannotDoor will not open Blocked drain outlet Procedure for draining the washing machineOpening the door Guarantee U.K After sales serviceGuarantee Other countries Optional accessoriesFront view Installation and connectionRear view Removing the transit bars Installation surfaceTransporting the washing machine to its installation site Installation and connection Re-fitting the transit bars Levelling the machine Screwing out and adjusting the feetPlease note Washer-dryer stackBuilding under a continuous work‐ top/ in a kitchen run Water protection system Electronic unit and washing machine housingInlet hose Drain hoseExtension hose MaintenanceConnection to the water sup‐ ply Drain hose connection Connection to the drainage systemElectrical connection U.K Non-rewireable plugs BSTechnical data Consumption data Follow steps  to  to programme and store in memory Programmable functionsWater plus system Gentle action Suds cooling Memory Soak duration Specialist detergents Optional accessoriesDetergent Machine care products Fabric carePage Page United Kingdom WDA En-GB Nr 900 700