Miele T 4422 C Problem Possible cause Remedy Drying process, Goes on too long or

Problem solving guide

Problem	Possible cause	Remedy
The drying process	Important: Before attempting to remedy one of the
goes on too long or	following causes, switch the dryer off and switch on again
even switches off.	to start the programme again.
	Ventilation to and from the	Open a door or window
	dryer may be insufficient	while the machine is in
	(e.g because it is installed in	operation for increased air
	a small room). This has	flow.
	caused the temperature in
	the room to rise sharply.
	The fluff filters are clogged	– Remove any fluff.
	up with fluff or were still wet	– The fluff filters must be
	when they were replaced.	completely dry.
	The laundry has not been	Make sure that your laundry
	spun sufficiently.	is thoroughly spun at
		highest spin speed for the
		type of fabric.
	The tumble dryer has been	Do not exceed the maximum
	overloaded.	load for the programme
		selected.
	Metallic components, e.g.	– Close zips and fasten any
	zips have prevented the	hooks next time.
	dryer from registering the	If the problem occurs again,
	correct moisture level in the	dry garments with long zips
	laundry.	using "Timed drying - Warm
		air".
	Detergent residues, hair and	Check the condenser unit
	fine fibres can block up the	from time to time and clean
	condenser unit.	it if necessary (see
		"Cleaning and Care").
	The vents below the door	Remove any objects that are
	are blocked.	blocking the vents.

29