Miele T 4422 C operating instructions Must be Earthed

Page 41

Electrical connection

If the colours of the wires in the mains lead of this machine do not correspond with the coloured markings identifying the terminals of your plug, proceed as follows:

^The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked

with the letter E or by the earth symbol z or coloured green, or green and yellow.

^The wire which is coloured blue must be connected to the terminal in the plug which is marked with the letter N or coloured black.

^The wire which is coloured brown must be connected to the terminal in the plug which is marked with the letter L or coloured red.

WARNING: THIS APPLIANCE

MUST BE EARTHED

Image 41

Contents Operating instructions For condenser tumble dryer T 4422 C Contents Contents Correct use Technical safetyOperation Using accessories Disposal of the packing material Caring for the environmentDisposal of your old machine Energy saving tipsDAdditional option buttons Indicator lamps Control panel / FeaturesGuide to the appliance DisplayElectronic lock and programmable functions Future updatesTime left display for Cottons and Minimum Iron programmes Wash care labels Tips on dryingProgramme chart Cool air Programme Fabric type Special notesWarm air Smoothing Hand carePrepare the laundry How to dry correctlyLoad the drum and switch on the dryer Anti-crease Selecting a programme Selecting additional optionsLow temperature Delay startShort BuzzerStarting a programme Clean out airways indicator lampAfter drying Additional notesBrief instructions To change a programme To cancel a programme and select a different programmeTo interrupt a programme Adding or removing itemsTo de-activate the system lock Electronic system lockTo activate the system lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Cleaning the condenser unitReplacing the condenser unit Problem solving guide Fluff Problem Possible cause Remedy There is a build upLaundry is not Sufficiently dryGoes on too long or Problem Possible cause Remedy Drying processEven switches off Service panel will Problem Possible cause Remedy Condenser unitBeen cleaned Interior drum Finish indicatorStops and the Clean Problem Possible cause RemedyAirways lamp comes FlashesSymbols flash Problem Possible cause Remedy Programme hasBeen interrupted Flashing,To change the interior drum lamp Future updates PC After sales serviceOptional accessories RepairsFront view InstallationReplacing the lid Installation siteTransporting the machine to its installation site Aligning the machine Before moving the machine again e.g. when moving houseRoom in which the dryer is located Washer dryer stackPulling out the drain hose External condensed water outletConnection to a sink drain outlet Electrical connection U.K Electrical connection U.K. Non-rewireable plugs BSElectrical connection Must be Earthed Cottons Consumption dataTechnical data Page Programmable functions for changing standard settings Increased drying level Programmable functionsProgramming and storing in memory To checkMemory Alteration rights reserved/0504