Miele T 4422 C Guide to the appliance, Control panel / Features, Display, FProgramme selector

Page 8

Guide to the appliance

Control panel / Features

aDelay Start button

The start of a programme can be delayed by up to 24 hours.

bStart button

Press the Start button to start a programme.

The indicator lamp will flash to indicate that a programme can be started. It lights up constantly once the programme has started.

cDisplay

The display fulfills several functions. See next page for details.

dAdditional option buttons Indicator lamps:

on = option selected

off = option not selected

See "How to dry correctly - selecting additional options" for details on these options.

eTimed drying button

To select the time required for timed drying with hot or cold air (max. 2 hours).

fProgramme selector

The programme selector can be turned clockwise or anti-clockwise. The light ring around the programme selector comes on during a pro- gramme and goes out a few minutes after it has ended to save energy. It will go out a few minutes after switching on the dryer if a programme has not been selected or if the programme selected is not started.

gProgramme sequence indicator lamps: show the drying stage reached;

Check lamps: see "Problem solving guide" for details.

hI-On/0-Off button

For switching the machine on and off or to interrupt a programme.

iDoor button

To open the door / cancel a programme.

Pressing this button will open the door even when the machine is switched off at the mains.

To save energy, the interior drum lighting will go out after a while if the dryer is switched on and the door is left open.

8

Image 8

Contents Operating instructions For condenser tumble dryer T 4422 C Contents Contents Technical safety Correct useOperation Using accessories Caring for the environment Disposal of the packing materialDisposal of your old machine Energy saving tipsControl panel / Features DAdditional option buttons Indicator lampsGuide to the appliance DisplayElectronic lock and programmable functions Future updatesTime left display for Cottons and Minimum Iron programmes Tips on drying Wash care labelsProgramme chart Cool air Programme Fabric type Special notesWarm air Hand care SmoothingPrepare the laundry How to dry correctlyLoad the drum and switch on the dryer Selecting a programme Selecting additional options Anti-creaseDelay start Low temperatureShort BuzzerClean out airways indicator lamp Starting a programmeAfter drying Additional notesBrief instructions To cancel a programme and select a different programme To change a programmeTo interrupt a programme Adding or removing itemsTo de-activate the system lock Electronic system lockTo activate the system lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitCleaning the condenser unit Checking the condenser unitReplacing the condenser unit Problem solving guide Problem Possible cause Remedy There is a build up FluffLaundry is not Sufficiently dryGoes on too long or Problem Possible cause Remedy Drying processEven switches off Problem Possible cause Remedy Condenser unit Service panel willBeen cleaned Interior drum Finish indicatorProblem Possible cause Remedy Stops and the CleanAirways lamp comes FlashesProblem Possible cause Remedy Programme has Symbols flashBeen interrupted Flashing,To change the interior drum lamp After sales service Future updates PCOptional accessories RepairsInstallation Front viewReplacing the lid Installation siteTransporting the machine to its installation site Before moving the machine again e.g. when moving house Aligning the machineRoom in which the dryer is located Washer dryer stackExternal condensed water outlet Pulling out the drain hoseConnection to a sink drain outlet Electrical connection U.K Electrical connection U.K. Non-rewireable plugs BSElectrical connection Must be Earthed Consumption data CottonsTechnical data Page Programmable functions for changing standard settings Programmable functions Increased drying levelProgramming and storing in memory To checkMemory Alteration rights reserved/0504