Guide to the appliance
Display
The display shows a variety of func- tions:
–it displays how long a programme has to run in hours and minutes;
–with "Delay start" it displays the time remaining until the programme starts;
–it displays programmable functions being selected and
Time left display for Cottons and Minimum Iron programmes
Once a sensor programme has started the time left for a programme to run will be calculated by the machine. During this calculation period the following bars will flash in the display:
===...
The programme duration can vary each time a programme is run because it is affected by a variety of factors e.g:
–the moisture content after spinning
–the type of textiles
–the quantity of laundry in the drum
–the ambient room temperature
–fluctuations in the electricity supply
The electronic unit adapts to each individual load of laundry. The time remaining for a programme to run shown in the display is calculated constantly during a programme. This means that the time displayed may fluctuate during the programme. If the time remaining in the display has
flashing bars in front of it, this indicates that the programme is about to enter the cooling down phase and is not indicative of a fault.
The time remaining displayed should not be taken as an accurate time measurement. It is an estimate of when your laundry should reach the level dryness you have selected.
Future updates
The indicator lamp marked "PC" is explained in "After Sales Service".
Electronic lock and programmable functions
Electronic lock
Prevents the machine being operated by others.
Programmable functions Programmable functions enable the machine to be adapted to suit personal requirements.
See the relevant section for detailed instructions.
9