Miele T 4422 C To change a programme, To interrupt a programme, Adding or removing items

Page 19

How to dry correctly

To change a programme

Programmes cannot be changed after the start button has been pressed. If the programme selector is turned to a different programme after a programme has begun, this will not affect the programme. The Anti-crease / Finish indicator lamp will flash. The indicator lamp will go out when the selector is returned to its original position.

After a programme has started, not all additional options can be switched on or off (see section "How to dry correctly").

To interrupt a programme

^Switch the machine off with the I-On /0-Offbutton.

To continue drying:

^Switch the dryer on with the I-On /0-Offbutton.

The programme will continue, as long as the cooling down phase has not been reached.

To cancel a programme and select a different programme

^Turn the programme selector to Finish.

The programme has been successfully cancelled when only the Anti-crease/Finishindicator lamp is on.

^Turn the programme selector to the required programme.

^Switch additional options on or off as required.

^Press the Start button.

Adding or removing items

^Press the Door button and open the door.

,Do not touch the back of the drum when adding or removing items. The drum could be very hot - danger of burning.

^Items can now be added or removed early.

To continue drying:

^Close the door.

^Switch additional options on or off as required.

^Press the Start button.

The programme will continue.

The time left shown in the display may now vary from the actual drying time.

19

Image 19
Contents Operating instructions For condenser tumble dryer T 4422 C Contents Contents Correct use Technical safetyOperation Using accessories Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old machineDisplay Control panel / FeaturesDAdditional option buttons Indicator lamps Guide to the applianceTime left display for Cottons and Minimum Iron programmes Future updatesElectronic lock and programmable functions Wash care labels Tips on dryingProgramme chart Warm air Programme Fabric type Special notesCool air Smoothing Hand careLoad the drum and switch on the dryer How to dry correctlyPrepare the laundry Anti-crease Selecting a programme Selecting additional optionsBuzzer Delay startLow temperature ShortAdditional notes Clean out airways indicator lampStarting a programme After dryingBrief instructions Adding or removing items To cancel a programme and select a different programmeTo change a programme To interrupt a programmeTo activate the system lock Electronic system lockTo de-activate the system lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Cleaning the condenser unitReplacing the condenser unit Problem solving guide Sufficiently dry Problem Possible cause Remedy There is a build upFluff Laundry is notEven switches off Problem Possible cause Remedy Drying processGoes on too long or Finish indicator Problem Possible cause Remedy Condenser unitService panel will Been cleaned Interior drumFlashes Problem Possible cause RemedyStops and the Clean Airways lamp comesFlashing, Problem Possible cause Remedy Programme hasSymbols flash Been interruptedTo change the interior drum lamp Repairs After sales serviceFuture updates PC Optional accessoriesFront view InstallationTransporting the machine to its installation site Installation siteReplacing the lid Washer dryer stack Before moving the machine again e.g. when moving houseAligning the machine Room in which the dryer is locatedPulling out the drain hose External condensed water outletConnection to a sink drain outlet Electrical connection Electrical connection U.K. Non-rewireable plugs BSElectrical connection U.K Must be Earthed Cottons Consumption dataTechnical data Page Programmable functions for changing standard settings To check Programmable functionsIncreased drying level Programming and storing in memoryMemory Alteration rights reserved/0504