Miele T 4422 C Programmable functions, Increased drying level, Programming and storing in memory

Page 46

Programmable functions

Increased drying level

The Sensitive System aims to dry using as little energy as possible. However, if you require the laundry to be drier, it is possible to reduce the final moisture level in the COTTONS and MINIMUM IRON programmes.

The machine is delivered with this programmable function switched off.

Programming and storing in memory

The programmable functions are activated to call up further features not shown on the control panel by using the additional option buttons in combination with the programme selector.

Before you begin, first ensure that:

–The tumble dryer is switched off.

–The door is closed.

–The programme selector is at Finish.

APress the additional option buttons Short and Low temperature at the same time, hold pressed in and ...

B... switch on the dryer with the I-On/0-Offbutton.

CLet go of all these buttons.

– "P" will appear in the display.

–The Drying and Cool air indicator lights will flash.

DTurn the programme selector to COTTONS, Extra dry.

EThe number of the programmable

function will flash alternately with the "P" on the left of the display -

P:P...1...P... 1... .

The number on the right will show constantly:

0= Increased drying level - off

1= Increased drying level - on

FPress the Start button to change the

number on the right from 0 to 1 = on or from

1 to 0 = off.

The setting you have selected is now stored in memory.

GSwitch the machine off with the I-On/0-Offbutton.

To check:

^Carry out steps A to E.

^Switch off the dryer. The check is complete.

46

Image 46

Contents Operating instructions For condenser tumble dryer T 4422 C Contents Contents Technical safety Correct useOperation Using accessories Disposal of your old machine Caring for the environmentDisposal of the packing material Energy saving tipsGuide to the appliance Control panel / FeaturesDAdditional option buttons Indicator lamps DisplayTime left display for Cottons and Minimum Iron programmes Future updatesElectronic lock and programmable functions Tips on drying Wash care labelsProgramme chart Warm air Programme Fabric type Special notesCool air Hand care SmoothingLoad the drum and switch on the dryer How to dry correctlyPrepare the laundry Selecting a programme Selecting additional options Anti-creaseShort Delay startLow temperature BuzzerAfter drying Clean out airways indicator lampStarting a programme Additional notesBrief instructions To interrupt a programme To cancel a programme and select a different programmeTo change a programme Adding or removing itemsTo activate the system lock Electronic system lockTo de-activate the system lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitCleaning the condenser unit Checking the condenser unitReplacing the condenser unit Problem solving guide Laundry is not Problem Possible cause Remedy There is a build upFluff Sufficiently dryEven switches off Problem Possible cause Remedy Drying processGoes on too long or Been cleaned Interior drum Problem Possible cause Remedy Condenser unitService panel will Finish indicatorAirways lamp comes Problem Possible cause RemedyStops and the Clean FlashesBeen interrupted Problem Possible cause Remedy Programme hasSymbols flash Flashing,To change the interior drum lamp Optional accessories After sales serviceFuture updates PC RepairsInstallation Front viewTransporting the machine to its installation site Installation siteReplacing the lid Room in which the dryer is located Before moving the machine again e.g. when moving houseAligning the machine Washer dryer stackExternal condensed water outlet Pulling out the drain hoseConnection to a sink drain outlet Electrical connection Electrical connection U.K. Non-rewireable plugs BSElectrical connection U.K Must be Earthed Consumption data CottonsTechnical data Page Programmable functions for changing standard settings Programming and storing in memory Programmable functionsIncreased drying level To checkMemory Alteration rights reserved/0504