Miele T 4422 C Problem Possible cause Remedy, Airways lamp comes, Stops and the Clean, Flashes

Page 31

Problem solving guide

Problem	Possible cause	Remedy
The Clean out	The fluff filters may be	Remove any fluff (see
airways lamp comes	blocked.	"Cleaning and care").
on.	The condenser unit may be	Please note that the
	blocked with fluff and	condenser unit must be
	detergent residues.	cleaned regularly (see
		"Cleaning and care").
		The check lamp will go out
		when the door is opened.
The programme	Possible causes and remedies are described above in
stops and the Clean	(The Clean out airways lamp comes on).
out airways lamp	There is no obvious cause.	– Switch off the dryer.
flashes.		– Then switch the dryer
		– Then switch the dryer
		back on and start the
		programme again.
		If the programme stops
		again and the Clean out
		airways lamp flashes, there
		is a fault. Contact the Miele
		Service Department.
The Empty out	The condensed water	– Empty out the
container indicator	container is full or there is	condensed water
lamp comes on.	kink in the drain hose.	container.
		– Check the drain hose.
		– Before starting a new
		programme, first switch
		the dryer off and then on
		again.

31

Image 31

Contents Operating instructions For condenser tumble dryer T 4422 C Contents Contents Correct use Technical safetyOperation Using accessories Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old machineDisplay Control panel / FeaturesDAdditional option buttons Indicator lamps Guide to the applianceTime left display for Cottons and Minimum Iron programmes Future updatesElectronic lock and programmable functions Wash care labels Tips on dryingProgramme chart Warm air Programme Fabric type Special notesCool air Smoothing Hand careLoad the drum and switch on the dryer How to dry correctlyPrepare the laundry Anti-crease Selecting a programme Selecting additional optionsBuzzer Delay startLow temperature ShortAdditional notes Clean out airways indicator lampStarting a programme After dryingBrief instructions Adding or removing items To cancel a programme and select a different programmeTo change a programme To interrupt a programmeTo activate the system lock Electronic system lockTo de-activate the system lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Cleaning the condenser unitReplacing the condenser unit Problem solving guide Sufficiently dry Problem Possible cause Remedy There is a build upFluff Laundry is notEven switches off Problem Possible cause Remedy Drying processGoes on too long or Finish indicator Problem Possible cause Remedy Condenser unitService panel will Been cleaned Interior drumFlashes Problem Possible cause RemedyStops and the Clean Airways lamp comesFlashing, Problem Possible cause Remedy Programme hasSymbols flash Been interruptedTo change the interior drum lamp Repairs After sales serviceFuture updates PC Optional accessoriesFront view InstallationTransporting the machine to its installation site Installation siteReplacing the lid Washer dryer stack Before moving the machine again e.g. when moving houseAligning the machine Room in which the dryer is locatedPulling out the drain hose External condensed water outletConnection to a sink drain outlet Electrical connection Electrical connection U.K. Non-rewireable plugs BSElectrical connection U.K Must be Earthed Cottons Consumption dataTechnical data Page Programmable functions for changing standard settings To check Programmable functionsIncreased drying level Programming and storing in memoryMemory Alteration rights reserved/0504