Miele T 4422 C After sales service, Repairs, Future updates PC, Optional accessories

Page 34

Problem solving guide

After sales service

Repairs

In the event of any faults which you cannot remedy yourself, please contact

–Your Miele Dealer or

–The nearest Miele Service Department (see back cover for address).

When contacting the Service Department, please quote the Model and Serial numbers both of which are located on the data plate situated on the right hand side below the drum aperture.

Please note that telephone calls may be monitored and recorded to improve our service.

Future updates (PC)

The indicator or check lamp marked PC on the fascia panel is the interface used by the Miele service technicians during service work for testing purposes and for updating the machine's programme data.

Optional accessories

Optional accessories for these dryers are available from your Miele Dealer or from the Miele Spare Parts Department.

34

Image 34

Contents Operating instructions For condenser tumble dryer T 4422 C Contents Contents Technical safety Correct useOperation Using accessories Disposal of your old machine Caring for the environmentDisposal of the packing material Energy saving tipsGuide to the appliance Control panel / FeaturesDAdditional option buttons Indicator lamps DisplayTime left display for Cottons and Minimum Iron programmes Future updatesElectronic lock and programmable functions Tips on drying Wash care labelsProgramme chart Warm air Programme Fabric type Special notesCool air Hand care SmoothingLoad the drum and switch on the dryer How to dry correctlyPrepare the laundry Selecting a programme Selecting additional options Anti-creaseShort Delay startLow temperature BuzzerAfter drying Clean out airways indicator lampStarting a programme Additional notesBrief instructions To interrupt a programme To cancel a programme and select a different programmeTo change a programme Adding or removing itemsTo activate the system lock Electronic system lockTo de-activate the system lock Cleaning and care Emptying the condensed water containerCleaning the fluff filters Cleaning them whilst dryCleaning the tumble dryer Cleaning them with waterCleaning the condenser unit Removing the condenser unitCleaning the condenser unit Checking the condenser unitReplacing the condenser unit Problem solving guide Laundry is not Problem Possible cause Remedy There is a build upFluff Sufficiently dryEven switches off Problem Possible cause Remedy Drying processGoes on too long or Been cleaned Interior drum Problem Possible cause Remedy Condenser unitService panel will Finish indicatorAirways lamp comes Problem Possible cause RemedyStops and the Clean FlashesBeen interrupted Problem Possible cause Remedy Programme hasSymbols flash Flashing,To change the interior drum lamp Optional accessories After sales serviceFuture updates PC RepairsInstallation Front viewTransporting the machine to its installation site Installation siteReplacing the lid Room in which the dryer is located Before moving the machine again e.g. when moving houseAligning the machine Washer dryer stackExternal condensed water outlet Pulling out the drain hoseConnection to a sink drain outlet Electrical connection Electrical connection U.K. Non-rewireable plugs BSElectrical connection U.K Must be Earthed Consumption data CottonsTechnical data Page Programmable functions for changing standard settings Programming and storing in memory Programmable functionsIncreased drying level To checkMemory Alteration rights reserved/0504