Miele T 4422 C operating instructions Memory

Page 47

Programmable functions

Memory

The additional options selected previously for specific programmes are stored in the machine’s memory.

The machine is delivered with this programmable function deactivated. It can be activated if wished.

Programming and storing in memory

The programmable functions are activated to call up further features not shown on the control panel by using the additional option buttons in combination with the programme selector.

Before you begin, first ensure that:

The tumble dryer is switched off.

The door is closed.

The programme selector is at Finish.

APress the additional option buttons Short and Low temperature at the same time, hold pressed in and ...

B... switch on the dryer with the I-On/0-Offbutton.

CLet go of all these buttons.

– "P" will appear in the display.

The Drying and Cool air indicator lights will flash.

DTurn the programme selector to COTTONS, Normal.

EThe number of the programmable

function will flash alternately with the "P" on the left of the display -

P:P...3...P... 3... .

The number on the right will show constantly:

0= Memory function - off

1= Memory function - on

FPress the Start button to change the

number on the right from 0 to 1 = on or from

1 to 0 = off.

The setting you have selected is now stored in memory.

GSwitch the machine off with the I-On/0-Offbutton.

To check:

^Carry out steps A to E.

^Switch off the dryer. The check is complete.

47

Image 47 Contents
Operating instructions For condenser tumble dryer T 4422 C Contents Contents Correct use Technical safetyOperation Using accessories Energy saving tips Caring for the environmentDisposal of the packing material Disposal of your old machineDisplay Control panel / FeaturesDAdditional option buttons Indicator lamps Guide to the applianceElectronic lock and programmable functions Future updatesTime left display for Cottons and Minimum Iron programmes Wash care labels Tips on dryingProgramme chart Cool air Programme Fabric type Special notesWarm air Smoothing Hand carePrepare the laundry How to dry correctlyLoad the drum and switch on the dryer Anti-crease Selecting a programme Selecting additional optionsBuzzer Delay startLow temperature ShortAdditional notes Clean out airways indicator lampStarting a programme After dryingBrief instructions Adding or removing items To cancel a programme and select a different programmeTo change a programme To interrupt a programmeTo de-activate the system lock Electronic system lockTo activate the system lock Emptying the condensed water container Cleaning and careCleaning them whilst dry Cleaning the fluff filtersCleaning them with water Cleaning the tumble dryerRemoving the condenser unit Cleaning the condenser unitChecking the condenser unit Cleaning the condenser unitReplacing the condenser unit Problem solving guide Sufficiently dry Problem Possible cause Remedy There is a build upFluff Laundry is notGoes on too long or Problem Possible cause Remedy Drying processEven switches off Finish indicator Problem Possible cause Remedy Condenser unitService panel will Been cleaned Interior drumFlashes Problem Possible cause RemedyStops and the Clean Airways lamp comesFlashing, Problem Possible cause Remedy Programme hasSymbols flash Been interruptedTo change the interior drum lamp Repairs After sales serviceFuture updates PC Optional accessoriesFront view InstallationReplacing the lid Installation siteTransporting the machine to its installation site Washer dryer stack Before moving the machine again e.g. when moving houseAligning the machine Room in which the dryer is locatedPulling out the drain hose External condensed water outletConnection to a sink drain outlet Electrical connection U.K Electrical connection U.K. Non-rewireable plugs BSElectrical connection Must be Earthed Cottons Consumption dataTechnical data Page Programmable functions for changing standard settings To check Programmable functionsIncreased drying level Programming and storing in memoryMemory Alteration rights reserved/0504