JVC XR-D400SL Press Speed to select the recording speed, Press Auto REC, 4x → 2x → 1x → 4x →

Recording operations

3 Press SPEED to select the recording speed.

Each time you press SPEED, the recording speed changes as follows:

4x → 2x → 1x → 4x → ...

•The recording speed is set to the 4x speed as the initial setting. Normally, you don’t need to change the recording speed.

SPEED

REPEAT

4x 2x 1x

1 TRACK ALL

Selected speed indicator lights up.

English

4 Press AUTO REC.

AUTO REC

•The AUTO REC indicator flashes and recording starts from the beginning track of the disc.

•The TRACK indicator of the track that is currently recording flashes.

•The unit stops recording and ejects the disc automatically when the recording is finished.

To cancel recording during recording

Press and hold 7 for more than 2 seconds.

Important note

When you cancel recording, the disc that is currently recorded cannot be used any more. When the disc is a CD-RW disc, erase the recorded data to use again.

NOTES

Recording operations

•When the recordable time of the CD-R or CD-RW disc is shorter than that of the source audio CD, the OVER indicator flashes and recording stops. Remove the disc and insert a disc that has enough recordable time.

•When you insert an improper disc to the disc tray, the TRACK indicator (error message) flashes (see page 30), and recording stops. Change the disc to the proper disc.

•A CD-R or CD-RW disc that is recorded by the AUTO REC function is finalized automatically. It does not need to be finalized separately.

•Use a blank CD-R or CD-RW disc for the AUTO REC function. You cannot use a disc that is already recorded for the AUTO REC function.

•When your CD player cannot play the CD-R or CD-RW disc that is recorded in the 4x speed mode, try other speed mode (2x or 1x). (Some CD-R or CD-RW discs that are recorded in the 2x or 1x speed mode may not be played back on your CD player.)

•You cannot hear the sound of a CD during recording regardless of the recording speed.

19