JVC XR-D400SL manual Important cautions, Safety precautions

Page 7

Introduction

Notes on handling

Important cautions

Installation of the unit

Select a place which is level, dry and neither too hot nor too cold (between 5˚C and 35˚C, 41˚F and 95˚F).

Leave sufficient distance between the unit and the TV.

Do not use the player in a place subject to vibrations.

AC Power cord

Do not handle the power cord with wet hands!

A small amount of power (2 watts) is always consumed while the power cord is connected to the wall outlet.

When unplugging the unit from the wall outlet, always pull the plug, not the power cord.

To prevent malfunction of the unit

There are no user-serviceable parts inside. If anything goes wrong, unplug the power cord and consult your dealer.

Do not insert any metallic object into the unit.

Do not use any non-standard shape disc available on the market, because it may damage the unit.

Do not use a disc with tape, seals, or paste on it, because damage to the unit may result.

Do not use a disc with a label that is printed by a label printer.

English

Introduction

Note about copyright laws

Please check the copyright laws in your country before recording Audio CD discs. Recording of copyrighted material may infringe copyright laws (see page 17).

Safety precautions

Avoid moisture, water and dust

Do not place your player in moist or dusty places.

Avoid high temperatures

Do not expose the unit to direct sunlight or place it near a heating device.

When you’re away

When away on travel or otherwise for an extended period of time, remove the plug from the wall outlet.

Do not insert foreign objects into the unit

Do not insert wires, hairpins, coins, etc. into the unit.

Do not block the vents

Blocking the vents may damage the unit.

Care of the cabinet

When cleaning the unit, use a soft cloth and follow the relevant instructions on the use of chemically-coated cloths. Do not use benzene, thinner or other organic solvents and disinfectants. These may cause deformation or discoloring.

If water gets inside the unit

Turn off the power switch and remove the plug from the wall outlet, then call the

 

store where you made your purchase. Using the unit in this state may cause a fire or

3

electrical shock.

Image 7
Contents Introduction Einleitung1 Getting started XR-D400SLClass 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Introduction Table of contentsSupplied accessories FeaturesImportant cautions Safety precautionsFor Audio use Preliminary knowledge about discsFor Scsi use For audio recording About recordable discsCD-R disc CD-RW discNames of parts and controls Getting startedFront panel REPEAT/SPEED indicators 14 Track indicatorPower indicator Power buttonLine OUT jacks L/R AC power connectorTermination switch Rear panelConnections for audio use To connect the AC power cordBefore making any connections To turn on the unit Press PowerPlayback operations Before operationPlace the disc into the loading tray To insert a discTo remove a disc Open the loading tray by pressingPlaying a CD To adjust the volume levelTo play a CD To locate a track directly To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate the beginning of a trackTo play the current track repeatedly Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play Playing repeatedly RepeatRepeat for more programming Press Track indicatorsTo create a program Press 6while pressingTo add a track To cancel program playTo cancel a track To check the programmed tracks manuallyAbout Finalize Recording operationsBefore operations Limitations of recordingTrack indicators of the tracks Speed indicatorRecording a disc Auto REC 4x → 2x → 1x → 4x → To cancel recording during recordingPress Speed to select the recording speed Press Auto RECTo record desired tracks Recording desired tracks Program RECPress Program REC Repeat for more programming To cancel program recording during recordingTo check the programmed tracks automatically Finalizing a disc Finalize Finalize indicatorAbout Finalize Erasing the recorded data Erase Connecting Using as a CD-R/RW driveConnecting and setting System configurationHost Computer With Scsi connector Unit Setting the Scsi device ID numberAbout the Scsi daisy chain Turn on the host computer OperationTo use the unit as a CD-R/RW drive Press ScsiCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingOFF Number Description Remedy Track indicator Error messagesGeneral SpecificationsAudio mode Scsi modeEN. GE. FR 0400NHYUBNSAN