JVC XR-D400SL manual Additional information, Care and handling of discs

Page 31

Additional information

Care and handling of discs

How to handle discs

When handling a disc, do not touch the surface of the disc.

Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the player to malfunction.

Even on label side

Do not damage the label side, stick paper to or use any adhesive on its surface.

Storage

Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or in a place where the humidity or temperature is high. Avoid leaving discs in your car!

English

Maintenance of discs

If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center outwards.

If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol or any anti-static agents.

CAUTION

Sometimes during play noise or images may be garbled. This is sometimes due to the disc. (It may not be up to industry standards.)

These symptoms are caused by the discs, not by the malfunction of the unit.

Additional information

27

Image 31
Contents Introduction Einleitung1 Getting started XR-D400SLClass 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Introduction Table of contentsSupplied accessories FeaturesImportant cautions Safety precautionsFor Audio use Preliminary knowledge about discsFor Scsi use For audio recording About recordable discsCD-R disc CD-RW discNames of parts and controls Getting startedFront panel REPEAT/SPEED indicators 14 Track indicatorPower indicator Power buttonLine OUT jacks L/R AC power connectorTermination switch Rear panelConnections for audio use To connect the AC power cordBefore making any connections To turn on the unit Press PowerPlayback operations Before operationPlace the disc into the loading tray To insert a discTo remove a disc Open the loading tray by pressingPlaying a CD To adjust the volume levelTo play a CD To locate a track directly To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate the beginning of a trackTo play the current track repeatedly Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play Playing repeatedly RepeatRepeat for more programming Press Track indicatorsTo create a program Press 6while pressingTo add a track To cancel program playTo cancel a track To check the programmed tracks manuallyAbout Finalize Recording operationsBefore operations Limitations of recordingTrack indicators of the tracks Speed indicatorRecording a disc Auto REC 4x → 2x → 1x → 4x → To cancel recording during recordingPress Speed to select the recording speed Press Auto RECTo record desired tracks Recording desired tracks Program RECPress Program REC Repeat for more programming To cancel program recording during recordingTo check the programmed tracks automatically Finalizing a disc Finalize Finalize indicatorAbout Finalize Erasing the recorded data Erase Connecting Using as a CD-R/RW driveConnecting and setting System configurationHost Computer With Scsi connector Unit Setting the Scsi device ID numberAbout the Scsi daisy chain Turn on the host computer OperationTo use the unit as a CD-R/RW drive Press ScsiCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingOFF Number Description Remedy Track indicator Error messagesGeneral SpecificationsAudio mode Scsi modeEN. GE. FR 0400NHYUBNSAN