JVC XR-D400SL manual Recording a disc Auto REC, Speed indicator, Track indicators of the tracks

Page 22

Recording operations

Recording a disc [AUTO REC]

You can record an audio CD on a CD-R or CD-RW disc from the beginning to the end of the disc by a simple operation.

SPEED indicator

1					2				3				4				5				6				7				8				9				10					OVER
POWER
11					12				13				14				15				16				17				18				19				20

SPEED	4x 2x 1x
REPEAT	1 TRACK ALL
			ERASE
		PROGRAM
	SPEED	REC	FINALIZE
	REPEAT

SPEED

SOURCE				OPEN/CLOSE

0 OPEN/CLOSE

SCSI

AUTO REC

REC/PLAY

AUTO REC

OPEN/CLOSE

0 OPEN/CLOSE

To record an audio CD from beginning to end

1 Open the loading tray by	POWER1	2	3	4	5	6	7	8	9	10OVER
pressing 0OPEN/CLOSE and	11	12	13	14	15	16	17	18	19	20
insert the audio CD that you want				SPEED		4x	2x 1x	PROGRAM
				REPEAT		1 TRACK ALL
										ERASE
to record to the disc tray for							SPEED		REC	FINALIZE
							REPEAT
	SOURCE									OPEN/CLOSE
SOURCE.
The TRACK indicators of the tracks		SCSI			AUTO REC					OPEN/CLOSE

REC/PLAY

that are contained on the audio CD are lit.

2 Open the loading tray by pressing 0OPEN/CLOSE and insert the blank CD-R or CD-RW disc into the disc tray for REC/ PLAY.

Loading tray for the source audio CD

Loading tray for the CD-R or CD-RW disc

18

Image 22

Contents XR-D400SL Introduction Einleitung1 Getting startedClass 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Table of contents IntroductionFeatures Supplied accessoriesSafety precautions Important cautionsFor Audio use Preliminary knowledge about discsFor Scsi use CD-RW disc About recordable discsCD-R disc For audio recordingNames of parts and controls Getting startedFront panel Power button Track indicatorPower indicator REPEAT/SPEED indicators 14Rear panel AC power connectorTermination switch Line OUT jacks L/RConnections for audio use To connect the AC power cordBefore making any connections Before operation Press PowerPlayback operations To turn on the unitOpen the loading tray by pressing To insert a discTo remove a disc Place the disc into the loading trayPlaying a CD To adjust the volume levelTo play a CD To locate the beginning of a track To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate a track directlyPlaying repeatedly Repeat Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play To play the current track repeatedlyPress 6while pressing Track indicatorsTo create a program Repeat for more programming PressTo check the programmed tracks manually To cancel program playTo cancel a track To add a trackLimitations of recording Recording operationsBefore operations About FinalizeTrack indicators of the tracks Speed indicatorRecording a disc Auto REC Press Auto REC To cancel recording during recordingPress Speed to select the recording speed 4x → 2x → 1x → 4x →To record desired tracks Recording desired tracks Program RECPress Program REC Repeat for more programming To cancel program recording during recordingTo check the programmed tracks automatically Finalizing a disc Finalize Finalize indicatorAbout Finalize Erasing the recorded data Erase System configuration Using as a CD-R/RW driveConnecting and setting ConnectingHost Computer With Scsi connector Unit Setting the Scsi device ID numberAbout the Scsi daisy chain Press Scsi OperationTo use the unit as a CD-R/RW drive Turn on the host computerAdditional information Care and handling of discsTroubleshooting Symptom Possible case RemedyOFF Error messages Number Description Remedy Track indicatorScsi mode SpecificationsAudio mode GeneralEN. GE. FR 0400NHYUBNSAN