JVC XR-D400SL manual Erasing the recorded data Erase, Erase indicator

Page 27

Recording operations

Erasing the recorded data [ERASE]

When you use a CD-RW disc, you can erase the recorded data.

English

1	2	3	4	5	6	7	8	9	10	OVER
POWER
11	12	13	14	15	16	17	18	19	20

SPEED	4x 2x 1x
REPEAT	1 TRACK ALL
			ERASE
		PROGRAM
	SPEED	REC	FINALIZE
	REPEAT
SOURCE			OPEN/CLOSE

SCSI	AUTO REC
	OPEN/CLOSE
REC/PLAY

ERASE indicator

ERASE

1 Insert a CD-RW disc you want to erase into the loading tray for REC/ PLAY.

2 Press and hold ERASE for more than 1 second.

• The ERASE indicator flashes and erasing starts.

ERASE

•Erasing takes a few minutes.

•When erasing has finished, the ERASE indicator goes off and the unit ejects the disc.

•The ERASE function does not erase all the recorded data, the ERASE function only erases some data such as track information. The erased CD-RW disc can be used as a blank disc.

NOTES

• Do not turn off the unit during erasing. It may damage the disc.

Recording operations

Image 27

Contents Introduction Einleitung1 Getting started XR-D400SLClass 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Introduction Table of contentsSupplied accessories FeaturesImportant cautions Safety precautionsPreliminary knowledge about discs For Audio useFor Scsi use For audio recording About recordable discsCD-R disc CD-RW discGetting started Names of parts and controlsFront panel REPEAT/SPEED indicators 14 Track indicatorPower indicator Power buttonLine OUT jacks L/R AC power connectorTermination switch Rear panelTo connect the AC power cord Connections for audio useBefore making any connections To turn on the unit Press PowerPlayback operations Before operationPlace the disc into the loading tray To insert a discTo remove a disc Open the loading tray by pressingTo adjust the volume level Playing a CDTo play a CD To locate a track directly To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate the beginning of a trackTo play the current track repeatedly Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play Playing repeatedly RepeatRepeat for more programming Press Track indicatorsTo create a program Press 6while pressingTo add a track To cancel program playTo cancel a track To check the programmed tracks manuallyAbout Finalize Recording operationsBefore operations Limitations of recordingSpeed indicator Track indicators of the tracksRecording a disc Auto REC 4x → 2x → 1x → 4x → To cancel recording during recordingPress Speed to select the recording speed Press Auto RECRecording desired tracks Program REC To record desired tracksPress Program REC To cancel program recording during recording Repeat for more programmingTo check the programmed tracks automatically Finalize indicator Finalizing a disc FinalizeAbout Finalize Erasing the recorded data Erase Connecting Using as a CD-R/RW driveConnecting and setting System configurationSetting the Scsi device ID number Host Computer With Scsi connector UnitAbout the Scsi daisy chain Turn on the host computer OperationTo use the unit as a CD-R/RW drive Press ScsiCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingOFF Number Description Remedy Track indicator Error messagesGeneral SpecificationsAudio mode Scsi modeEN. GE. FR 0400NHYUBNSAN