JVC XR-D400SL manual Finalizing a disc Finalize, Finalize indicator, About Finalize

Page 26

Recording operations

Finalizing a disc [FINALIZE]

Finalize a recorded CD-R or CD-RW disc so that you can play the disc on a CD player.

1				2				3				4				5				6				7				8				9				10				OVER
POWER
11				12				13				14				15				16				17				18				19				20

SPEED	4x 2x 1x
REPEAT	1 TRACK ALL
			ERASE
		PROGRAM
	SPEED	REC	FINALIZE
	REPEAT
SOURCE			OPEN/CLOSE

FINALIZE indicator

FINALIZE

SCSI

AUTO REC

OPEN/CLOSE

REC/PLAY

1 Make sure that the CD-R or CD-RW disc you want to finalize is inserted into the loading tray for REC/PLAY.

2 Press and hold FINALIZE for more than 1 second.

•The FINALIZE indicator flashes and finalizing starts.

•Finalizing takes a few minutes.

•When finalizing is finished, the FINALIZE indicator goes off and the unit ejects the disc.

FINALIZE

NOTES

•Do not turn off the unit during finalizing. It may damage the disc.

•A CD-R or CD-RW disc that is recorded by the AUTO REC function is finalized automatically. It does not need to be finalized sequentially.

•You can select the speed for finalizing by pressing SPEED.

About Finalize

“Finalize” is the final process to make the recorded disc playable on a CD player. A disc that is finalized cannot be recorded any more. Please make sure that the recording is finished before finalizing.

22

Image 26

Contents XR-D400SL Introduction Einleitung1 Getting startedClass 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Table of contents IntroductionFeatures Supplied accessoriesSafety precautions Important cautionsFor Scsi use Preliminary knowledge about discsFor Audio use CD-RW disc About recordable discsCD-R disc For audio recordingFront panel Getting startedNames of parts and controls Power button Track indicatorPower indicator REPEAT/SPEED indicators 14Rear panel AC power connectorTermination switch Line OUT jacks L/RBefore making any connections To connect the AC power cordConnections for audio use Before operation Press PowerPlayback operations To turn on the unitOpen the loading tray by pressing To insert a discTo remove a disc Place the disc into the loading trayTo play a CD To adjust the volume levelPlaying a CD To locate the beginning of a track To stop playback completely or temporarilyTo advance or reverse play rapidly while playing To locate a track directlyPlaying repeatedly Repeat Press Repeat repeatedly so that the ALL indicator lights upTo cancel repeat play To play the current track repeatedlyPress 6while pressing Track indicatorsTo create a program Repeat for more programming PressTo check the programmed tracks manually To cancel program playTo cancel a track To add a trackLimitations of recording Recording operationsBefore operations About FinalizeRecording a disc Auto REC Speed indicatorTrack indicators of the tracks Press Auto REC To cancel recording during recordingPress Speed to select the recording speed 4x → 2x → 1x → 4x →Press Program REC Recording desired tracks Program RECTo record desired tracks To check the programmed tracks automatically To cancel program recording during recordingRepeat for more programming About Finalize Finalize indicatorFinalizing a disc Finalize Erasing the recorded data Erase System configuration Using as a CD-R/RW driveConnecting and setting ConnectingAbout the Scsi daisy chain Setting the Scsi device ID numberHost Computer With Scsi connector Unit Press Scsi OperationTo use the unit as a CD-R/RW drive Turn on the host computerAdditional information Care and handling of discsTroubleshooting Symptom Possible case RemedyOFF Error messages Number Description Remedy Track indicatorScsi mode SpecificationsAudio mode GeneralEN. GE. FR 0400NHYUBNSAN