JVC XR-D400SL manual Off

Page 33

Additional information

English

Symptom	Possible case	Remedy

Recording procedure	Recording cannot be	Wait until recording is
does not stop even	cancelled until recording	finished.
though the STOP	is finished.
button is pressed.

The disc cannot be	The OPEN/CLOSE button	Wait until recording is finished
ejected.	does not work during	or cancel the program mode.
	recording or program
	mode.

The button does not	The unit is in the SCSI	Set the SCSI mode to OFF.
work.	mode.
	An operation such as	Wait until the recording is
	cancelling recording	finished.
	takes a few times.
	Some operations do not	Press the proper button.
	work depending on the
	situation.

The computer does	The SCSI mode is set to	Restart the computer after the
not recognize the	OFF.	SCSI mode is set to ON.
unit.	The SCSI ID number is	Set the proper SCSI number.
	The SCSI ID number is	Set the proper SCSI number.
	not correct.
	not correct.			Additional information
	The SCSI termination	Set the SCSI termination		Additional information
	The SCSI termination	Set the SCSI termination
	setting is not correct.	correctly.

The disc cannot be	The disc may be used	Use a disc that is compatible
written in the SCSI	high-speed writing only.	with 1-4x writing.
mode.

29

Image 33

Contents Introduction Einleitung1 Getting started XR-D400SLClass 1 Laser Product LASER-PRODUKT DER Klasse Achtung Disclaimer Introduction Table of contentsSupplied accessories FeaturesImportant cautions Safety precautionsPreliminary knowledge about discs For Audio useFor Scsi use CD-R disc About recordable discsCD-RW disc For audio recordingGetting started Names of parts and controlsFront panel Power indicator Track indicatorPower button REPEAT/SPEED indicators 14Termination switch AC power connectorRear panel Line OUT jacks L/RTo connect the AC power cord Connections for audio useBefore making any connections Playback operations Press PowerBefore operation To turn on the unitTo remove a disc To insert a discOpen the loading tray by pressing Place the disc into the loading trayTo adjust the volume level Playing a CDTo play a CD To advance or reverse play rapidly while playing To stop playback completely or temporarilyTo locate the beginning of a track To locate a track directlyTo cancel repeat play Press Repeat repeatedly so that the ALL indicator lights upPlaying repeatedly Repeat To play the current track repeatedlyTo create a program Track indicatorsPress 6while pressing Repeat for more programming PressTo cancel a track To cancel program playTo check the programmed tracks manually To add a trackBefore operations Recording operationsLimitations of recording About FinalizeSpeed indicator Track indicators of the tracksRecording a disc Auto REC Press Speed to select the recording speed To cancel recording during recordingPress Auto REC 4x → 2x → 1x → 4x →Recording desired tracks Program REC To record desired tracksPress Program REC To cancel program recording during recording Repeat for more programmingTo check the programmed tracks automatically Finalize indicator Finalizing a disc FinalizeAbout Finalize Erasing the recorded data Erase Connecting and setting Using as a CD-R/RW driveSystem configuration ConnectingSetting the Scsi device ID number Host Computer With Scsi connector UnitAbout the Scsi daisy chain To use the unit as a CD-R/RW drive OperationPress Scsi Turn on the host computerCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingOFF Number Description Remedy Track indicator Error messagesAudio mode SpecificationsScsi mode GeneralEN. GE. FR 0400NHYUBNSAN