CONNECTING THE INLET HOSE
Method1
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.
01
1.If space permits, attach the brass female end of the “Y” connector to the cold water faucet.
2.Turn the cold water faucet off.
3.Attach the straight end of long hose to “Y’ connector.
4.Using pliers, tighten the coupling with an additional two- thirds turn.
Do not overtighten, as it may damage the coupling.
Duct Ehuast 
installing your dryer
5.Attach angled end of long hoses to fill the valve at the bottom of the dryer’s rear frame. Screw on coupling by hand until it is seated on fill valve connector.
6.Using pliers, tighten the coupling with an additional two- thirds turn.
Do not overtighten, as it may damage the coupling.
7.Check that the water faucets are on.
8.Check for leaks around “Y” connector, faucets and hoses.
Duct Ehuast
Frame (back)
Water Hose
Method2
The dryer must be connected to the cold water faucet using the new inlet hoses. Do not use old hoses.
1.If “Y” connector cannot be attached directly to the cold water faucet, the short hose must be used.
2.Turn the cold water faucet off.
3.Attach short inlet hose to cold water faucet.
Screw on coupling by hand until it is seated on the faucet.
4.Using pliers, tighten the coupling with an additional two- thirds turn.
Short hose
(Inlet to cold
water)
“Y’ connector
Do not overtighten, as it may damage the coupling.
5.Attach ‘Y” connector to brass male end of small hose. Screw on coupling by hand until it is seated on connector.
6.Using pliers, tighten the coupling with an additional two- thirds turn.
Do not overtighten, as it may damage the coupling.
Long hose
Duct Ehuast
Frame (back)
7.Attach angled end of long hoses to the fill valve at the bottom of the dryer rear frame. Screw on coupling by hand until it is seated on fill valve connector.
8.Using pliers, tighten the coupling with an additional two- thirds turn.
Do not overtighten, as it may damage the coupling.
9.Check that the water faucets are on.
10.Check for leaks around “Y” connector, faucets and hoses.
Water Hose
installing your dryer _17