Samsung DV520 Digital Graphic, Display, Dry Level, Selection Button, Temp Selection, Delay Start

The display window shows the estimated time remaining in the cycle and the

chosen cycle after the Start/Pause button is pressed. The estimated time

remaining may fluctuate as the cycle progresses.

The “DRYING” and the chosen cycle will be showed by turn in the display until

2

Digital Graphic

the cycle is complete.

Display

When your dryer is in the cool-down phase, the “COOLING” will be showed.

When the cycle is complete, “END” will appear in the display panel until the dryer

door is opened or the Power key is pushed.

If your dryer is paused during a cycle, the display doesn’t change showing the

chosen cycle and remaining time until the Start/Pause button is pressed.

To select the dry level in the Normal, Heavy Duty, or other Sensor Dry cycles,

press the Dry Level button. An indicator light will illuminate next to the desired

dryness level.

3

Dry Level

Press the button repeatedly to scroll through the settings. Larger or bulkier loads

Selection Button

may require the Very Dry or More Dry setting for complete dryness.

The Less Dry setting is best suited for lightweight fabrics or for leaving some

moisture in the clothing at the end of the cycle. Damp Dry is designed to partially

dry items. Use for items that lay flat or hang to dry.

To select the correct temperature for the load, press the Temp button. An indicator

light will illuminate next to the desired temperature. Press the button repeatedly to

scroll through the settings.

Temp Selection

High – For sturdy cottons or those labeled Tumble Dry.

4

Medium – For permanent press, synthetics, lightweight cottons, or items labeled

Button

Tumble Dry Medium.

Med Low – For lower heat than Medium to dry synthetic or washable knit fabrics.

Low – For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm.

Extra Low – Provides the lowest heated dry temperature possible.

When using Manual Dry cycles, time can be adjusted by pressing the time

5

Time Selection

selection button.

Button

During the Sensory Dry cycle, the time light indicator is off because exact drying

times are determined by fluctuating humidity levels.

When the cycle is complete, a chime will sound.

6

Signal Selection

When the Wrinkle Prevent option is selected, the chime will sound intermittently.

Button

Adjust the volume of the chime or turn it off by pressing the Signal button.

Press the button repeatedly to scroll through the choices.

7

Delay Start

Any cycle can be delayed for up to 24 hours in one-hour increments. Displayed

Button

hour indicates the time at which the wash will be started