Maytag W10560158B - SP Tie all strings and straps before starting wash load, Unloading washer

Page 16

TROUBLESHOOTING

First try the solutions suggested here or visit our website at www.maytag.com/product_help -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

If you experience

Possible Causes

Solution

Washer not performing as expected (cont.)

Fabric Damage

Sharp items were in pockets during

Empty pockets, zip zippers, and snap or hook fasteners before

 

wash cycle.

washing to avoid snags and tears.

 

Strings and straps could have tangled.

Tie all strings and straps before starting wash load.

 

Items may have been damaged before

Mend rips and broken threads in seams before washing.

 

washing.

 

 

Fabric damage can occur if washer is

Load garments in loose heaps evenly around the washplate.

 

tightly packed.

 

 

Use cycle designed for the fabrics being washed.

 

 

 

 

Add only 1 or 2 additional garments after washer is started.

 

Liquid chlorine bleach may have been

Do not pour liquid chlorine bleach directly onto load. Wipe up

 

added incorrectly.

bleach spills.

 

 

Undiluted bleach will damage fabrics. Do not use more than

 

 

recommended by manufacturer.

 

 

Do not place load items on top of bleach dispenser when loading

 

 

and unloading washer.

 

Garment care instructions may not

Always read and follow garment manufacturer’s care label

 

have been followed.

instructions. See the “Cycle Guide” to match your load with

 

 

the best cycle.

Odors

Monthly maintenance not done as

Run the Clean Washer with affresh® cycle after every 30 washes.

 

recommended.

See “Washer Care” in Washer Maintenance.

 

 

Unload washer as soon as cycle is complete.

 

Using wrong or too much detergent.

Use only HE detergent. Be sure to measure correctly. Always

 

 

follow the manufacturer’s directions.

 

 

See “Washer Care” section.

Lid locked light is

The lid is not closed.

Close the lid. The washer will not start or fill with the lid open.

flashing

 

 

A cycle was stopped or paused

The washer may still be spinning. The lid will not unlock until the

 

 

using the Start/Pause/Unlock button.

basket has stopped spinning. This may take several minutes if

 

 

washing large loads or heavy fabrics.

Single-dose laundry

Adding laundry packet incorrectly.

Be sure laundry packet is added to washer basket before adding

packet not dissolving

 

clothes. Follow the manufacturer’s instructions to avoid damage to

 

 

your garments.

16

Image 16
Contents USE and Care Guide Washer Safety Cleaning with Less Water Automatic Load Size Sensing WHAT’S NEW Under the LID?Control Panel and Features Following options may be added to most cyclesRinse Cycle Guide Items to wash Cycle Wash Temp Spin Cycle Details SpeedUsing Your Washer Sort and prepare your laundry Add laundry productsLoad laundry into washer Helpful TipsAdd HE detergent Add liquid chlorine bleach to dispenserAdd liquid fabric softener or Oxi to dispenser Select cycleSelect wash temperature Select cycle options, if desiredPress START/Pause/Unlock to begin wash cycle Unlocking the lid to add garmentsWasher Maintenance Cleaning Your Top Loading WasherTo winterize washer To use washer againWater Leaks TroubleshootingWasher not performing as expected Not using HE detergent or using too Both hot and cold water faucets must be turned onCheck that inlet valve screens have not become clogged Close lid and press START/Pause/UnlockTo remove excess water. See Using Your Washer for loading Installation. Drain hose extends intoTemperatures Washer was unable toSee Using Your Washer section Not cleaning or removing Added more water to washerWasher is less efficient at cleaning when tightly packed Improve cleaningTie all strings and straps before starting wash load Mend rips and broken threads in seams before washingUnloading washer Your garmentsThis limited warranty does not cover Maytag Laundry WarrantyA., call 1-800-688-9900. In Canada, call 10/11 Sécurité DE LA Laveuse Quoi DE Neuf Sous LE COUVERCLE? Nettoyer avec moins d’eauSoil Level niveau de saleté Tableau DE Commande ET CaractéristiquesWash Temp température de lavage Sensing détection Wash lavageRinse rinçage Spin essorageGuide DE Programmes Hot chaudeWarm tiède Cold froideUtiliser ce programme à l’issue de chaque série de Articles dans la laveuse pendant le programme CleanPour les charges nécessitant un programme de rinçage Rinçage sansUtilisation DE LA Laveuse Trier et préparer le linge Ajouter les produits de lessiveCharger les vêtements dans la laveuse Conseils utilesAjouter le détergent HE dans le distributeur Ajouter l’agent de blanchiment liquide dans le distributeurAjouter de l’assouplissant pour tissu dans le distributeur Sélectionner le programme10. Sélectionner les options de programme si désiré Sélectionner la température de lavageTempérature de lavage Tissus suggérés Hot chaude Cool fraîcheEntretien DE LA Laveuse Nettoyage de la laveuse à chargement par le dessusRemise en marche de la laveuse Hivérisation de la laveuseDépannage Fuites d’eauLa laveuse ne fonctionne Fusible grilléRemarque Si le problème persiste, appeler un électricien Fonctionnement normalRecommandations sur la façon de charger la laveuse Ou le témoin lumineuxCorrectement suite La laveuse ne se Des petits articles sont peut-êtreQue recommandé Trop tassée ObstruésÉliminer toute déformation du tuyau d’arrivée Peut-être trop tassée Bien tasséeUtiliser le programme Power Wash pour un nettoyage puissant Les articlesLes couleurs similaires ne sont Pas lavées ensembleUtiliser plus que la quantité recommandée par le fabricant Faire fonctionner le programme Clean Washer with affreshBlanchiment lorsqu’on charge et décharge la laveuse Suspendu à l’aide du bouton StartLa présente garantie limitée ne couvre pas Garantie DES Appareils DE Buanderie MaytagNom du marchand W10560157C W10560158B-SP U.S.AU.S.A. and Canada You can write with any questions or concerns at