JVC XL-R2010BK manual Programming Playback Using the Remote Control, Press the Play Mode button

Page 19

To change the contents of the program

In the CD stop mode, press the SET button followed by the CAN- CEL button. Programmed tracks will be erased in the reverse order of when they were entered (starting from the last track pro- grammed). Press the CANCEL button twice to erase one track. Continue erasing in this manner until all of the tracks you wanted to remove are erased. Enter new tracks into the program by follow- ing programming Step 4.

To check the contents of the program

To check the tracks you have entered into the program, press the CD Control STOP 7 button, and use the MULTI JOG Control to review the programmed tracks. The program steps (PG S**) and track numbers will be shown in the information display one at a time as you toggle through the program (S: Step; **: step number).

To return to continuous playback

In the CD stop mode, repeatedly press the PLAY MODE button on the main unit until the total playing time is shown in the informa- tion display.

Main Unit

PLAY MODE

Note

•When the power is turned off, the contents of the program are erased.

Programming Playback Using the Remote Control

If you want to program and record tracks, see “Program Edit Recording” on page 26.

STANDBY/ON

CD REC CD EDIT FINALIZE DISPLAY

 

1

2

 

3

 

 

4

5

 

6

 

 

7

8

 

9

 

 

10

+10

 

 

 

3

PLAY

REPEAT

C O N T R O L

 

MODE

CD

CDR

2

•REC

 

FADE

SYNCHRO

REC MUTING

 

 

SOURCE

MENU

REC

 

PITCH+

SET

4

PITCH–

PITCH 0

CHAN

 

CEL

RM–SXLR2010A REMOTE CONTROL

1 Load a CD into the tray of the CD player.

•Only tracks on the CD loaded in the CD player can be registered into the program (i.e., tracks on a CD loaded in the CDR cannot be selected for playback).

•“CD READ DISC” will be shown in the information display as the unit reads the information from each disc.

2 Press the CD Deck Selection button to place the unit in the CD mode.

•The CD indicator is shown in the display window.

3 Press the PLAY MODE button.

•The PROGRAM indicator is shown in the display window, and if no program has been registered, “PG NO PROGRAM” is shown in the information display.

4 Press the SET button.

•The information display will show the following.

Program step number

Track number

5 Select and enter a track number (1-99) using the 4 (reverse) or ¢ (forward) buttons, and then press the SET button.

SET

1. Select the track.

2. Enter the selection

selection.

(To be continued on the next page)

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Disc care Precautions FeaturesInstallation Cleaning the cabinetConnections Selecting a Compu LINK-4 Mode switch positionAnalog Connections Optical Cable Input/Output Terminals How to use optical terminals for connectionsDigital Connections Digital Optical and Coaxial Cable ConnectionsMain Unit ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlTo turn power to the unit on Turning the Power On and Standby ModeTo put the unit in standby mode during operation Press the CD control Play 3 button Listening to CDsCD player Continuous Playback Press the CD Control OPEN/CLOSE 0 button to open the trayRemoving a CD from the CDR CDR Playback OperationsTo stop CDR playback To stop CDR playback temporarilyPress the number buttons of the track you want to play Using the Remote Control to Control PlaybackDirect Playback of a Specific Track Press the CD or CDR button to select the deviceSkipping Tracks Forward and Reverse SearchRepeat Playback Setting the repeat play modeUsing repeat mode during program or random play modes To release the random playback modeCD Playback Pitch Control To adjust the pitch of a CD during playbackTo restore the playback speed to normal, press Pitch To cancel the Disc Lock functionRepeat to program up to a maximum Steps Programming Playback Using Main Unit ControlsLoad a CD into the tray of the CD player Press the SET button to start program registrationPress the Play Mode button Programming Playback Using the Remote ControlPress the SET button Press the 3 button to start program play Read through this section before recording Add Finalize FeatureTo disable the Add Finalize feature Recording onto CD-R/RW DiscsInsert a recordable CD-R or CD-RW Select a recording source Manual RecordingTo increase the recording level from Line Turn the Multi JOG to select High Press the SET buttonAuto Track function on When recording is completeTo add track marks automatically Synchronized Recording of CD player PlaybackAuto Track function off To stop the recording at any time When ADD FINALIZE? is shown in the information windowStop the CD to be recorded Checking a track number during recordingInsert a recordable CD-R or CD-RW disc in the CDR disc tray When recording completesDisc Dubbing Start playback the CD to be recordedListening Edit Recording When the first track has been stored in memorySelected tracks can be programmed and recorded Start to DUB? is shown in the information display Program Edit RecordingRecording process starts Select and enter a track number CD player to CDR Recording OptionsRepeat to continue programming tracks Setting the Auto Track Spacing Function Setting the Unit for High-speed RecordingSynchronized recording to the CDR from an external source Press the Synchro button main unit/remote controlSynchronized Recording from External Sources Start playing of the source unitExample Current setting is shown in the information displayMixed Input Recording Load a recordable CD-R or CD-RW in the CDR disc trayCD + MIC CD + LineLine + MIC Skipping a Recorded Track on a CD-R or CD-RW Track Skip Special Recording Edit OperationsErasing a Track or Tracks Erase Function CD-RW only Load the CD-RW to be erased in the CDR disc tray Erasing All Tracks Disc Erase Function CD-RW onlyFinalizing a Disc Press the Finalize button main unit/remote controlLoad a finalized CD-RW disc into the CDR disc tray Press the SET button again to confirm the operation High CD- R4x,CD- RW2x Resetting the Unit to Factory Default SettingsCurrent setting appears in the display DUB- SpeedTurn the Multi JOG control to select the time interval Sleep TimerCompu Link Function What is Compu LINK?Message Significance Remedy CD and CDR MessagesUnlock Disc FullTNO Full Cannot RECScms Serial Copy Management System Control TroubleshootingCommon PlayerCD Player Section Main SpecificationsCommon Specifications AccessoriesMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents