JVC XL-R2010BK CD Playback Pitch Control, Disc Lock Function, To cancel the Disc Lock function

Page 17

•

CD Playback Pitch Control

There are 3 CD pitch control buttons on the remote control that can be used to vary the speed of CD playback up to 12% faster or slower than the standard playback speed. This function can be use- ful in changing the pitch when adding vocals to a recording using the microphone input or when matching the playback speed of the CD with another source.

Note

•Pitch control cannot be used for the CDR.

To adjust the pitch of a CD during playback

To raise the pitch of CD playback (i.e., increase the speed of play- back), press PITCH+. Likewise, to lower the pitch of CD playback (i.e., slow down the speed of playback), press PITCH–.Each press of a button raises or lowers playback speed 1% (up to 12% max.).

 

•REC

FADE SYNCHRO

 

REC MUTING

 

 

SOURCE

MENU

PITCH+/PITCH

REC

 

 

PITCH+

PITCH 0

 

SET

PITCH 0

CHANCE

 

 

PITCH–

 

 

L

 

RM–SXLR2010A REMOTE CONTROL

•To restore the playback speed to normal, press PITCH 0.

•The adjusted playback speed can only be recorded using analog recording functions such as mixed recording.

•Even if the pitch has been adjusted, when digital synchronized recording is performed, the pitch is automatically restored to 0 before recording begins.

•The amount of pitch adjustment (+/-/0) is shown in the informa- tion display when one of the pitch buttons is pressed.

•When the speed of CD playback is changed using the pitch con- trol buttons, there is no signal output from the DIGITAL OUT OPTICAL terminal.

Disc Lock Function

The Disc Lock function can be used to make it impossible for chil- dren or anyone else to take CDs out of or load new ones into the CD player and CDR.

•When the power is on press the CD Control OPEN/CLOSE 0 button while holding down the CD Control STOP 7 button on the front panel. “TRAY LOCKED” will be shown in the infor- mation display for 3 seconds, after which it is no longer possi- ble to remove from or load CDs into the unit.

0

 

 

 

 

XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER

 

 

 

 

 

 

STANDBY

 

 

OPEN/CLOSE

REC SOURCE

 

 

 

OPEN/CLOSE

 

 

 

 

 

 

DIGITAL

CD LINE

MIC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

–

+

STANDBY/ON

 

 

 

 

 

 

 

 

 

 

 

PLAY MODE

CD EDIT

CD REC

 

 

SYNCHRO

MENU

SET

CANCEL

 

 

LEVEL

PHONES

 

 

 

 

 

 

 

MIX BLANCE

LINE

CD

 

STOP

PLAY

PAUSE

REC SOURCE

 

FINALIZE

STOP

PLAY

PAUSE REC/REC MUTING

 

 

 

SELECTOR

 

 

 

MIN MAX

MIC

 

7

To cancel the Disc Lock function.

Repeat the same step followed to lock the trays. “TRAY UNLOCKED” will be shown in the information display for 3 sec- onds, after which the Disc Lock function is canceled.

Note

The Disc Lock function is canceled if the AC power cord is unplugged from the wall outlet.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents XL-R2010BK Or Electric SHOCK, do not Expose Table of Contents Installation Precautions FeaturesCleaning the cabinet Disc careAnalog Connections Selecting a Compu LINK-4 Mode switch positionConnections Digital Connections How to use optical terminals for connectionsDigital Optical and Coaxial Cable Connections Optical Cable Input/Output TerminalsMain Unit ComponentsDisplay Window Remote Control Using the Remote ControlInserting the Batteries Using the Remote ControlTo put the unit in standby mode during operation Turning the Power On and Standby ModeTo turn power to the unit on CD player Continuous Playback Listening to CDsPress the CD Control OPEN/CLOSE 0 button to open the tray Press the CD control Play 3 buttonTo stop CDR playback CDR Playback OperationsTo stop CDR playback temporarily Removing a CD from the CDRDirect Playback of a Specific Track Using the Remote Control to Control PlaybackPress the CD or CDR button to select the device Press the number buttons of the track you want to playSkipping Tracks Forward and Reverse SearchUsing repeat mode during program or random play modes Setting the repeat play modeTo release the random playback mode Repeat PlaybackTo restore the playback speed to normal, press Pitch To adjust the pitch of a CD during playbackTo cancel the Disc Lock function CD Playback Pitch ControlLoad a CD into the tray of the CD player Programming Playback Using Main Unit ControlsPress the SET button to start program registration Repeat to program up to a maximum StepsPress the SET button Programming Playback Using the Remote ControlPress the Play Mode button Press the 3 button to start program play To disable the Add Finalize feature Add Finalize FeatureRecording onto CD-R/RW Discs Read through this section before recordingTo increase the recording level from Line Manual RecordingTurn the Multi JOG to select High Press the SET button Insert a recordable CD-R or CD-RW Select a recording sourceAuto Track function on When recording is completeAuto Track function off Synchronized Recording of CD player PlaybackTo add track marks automatically Stop the CD to be recorded When ADD FINALIZE? is shown in the information windowChecking a track number during recording To stop the recording at any timeDisc Dubbing When recording completesStart playback the CD to be recorded Insert a recordable CD-R or CD-RW disc in the CDR disc traySelected tracks can be programmed and recorded When the first track has been stored in memoryListening Edit Recording Recording process starts Program Edit RecordingStart to DUB? is shown in the information display Repeat to continue programming tracks CD player to CDR Recording OptionsSelect and enter a track number Setting the Auto Track Spacing Function Setting the Unit for High-speed RecordingSynchronized Recording from External Sources Press the Synchro button main unit/remote controlStart playing of the source unit Synchronized recording to the CDR from an external sourceMixed Input Recording Current setting is shown in the information displayLoad a recordable CD-R or CD-RW in the CDR disc tray ExampleLine + MIC CD + LineCD + MIC Erasing a Track or Tracks Erase Function CD-RW only Special Recording Edit OperationsSkipping a Recorded Track on a CD-R or CD-RW Track Skip Load the CD-RW to be erased in the CDR disc tray Erasing All Tracks Disc Erase Function CD-RW onlyLoad a finalized CD-RW disc into the CDR disc tray Press the Finalize button main unit/remote controlFinalizing a Disc Press the SET button again to confirm the operation Current setting appears in the display Resetting the Unit to Factory Default SettingsDUB- Speed High CD- R4x,CD- RW2xTurn the Multi JOG control to select the time interval Sleep TimerCompu Link Function What is Compu LINK?Message Significance Remedy CD and CDR MessagesTNO Full Disc FullCannot REC UnlockScms Serial Copy Management System Common TroubleshootingPlayer ControlCommon Specifications Main SpecificationsAccessories CD Player SectionMemo 0501SKMBWNJEM

XL-R2010BK specifications

The JVC XL-R2010BK is a versatile and robust CD-R/RW recorder that has been designed for audiophiles and recording enthusiasts alike. This high-performance unit combines cutting-edge technology with a user-friendly interface, making it an excellent choice for both professional and home studio environments.

One of the standout features of the XL-R2010BK is its ability to record CDs with exceptional audio quality. It supports both CD-R and CD-RW formats, allowing users to create permanent recordings or rewrite data as needed. The device is equipped with a high-quality, low-jitter digital-to-analog converter (DAC), which ensures that sound reproduction remains faithful to the original recording. This feature is particularly valuable for those who prioritize audio fidelity in their recordings.

In terms of connectivity, the XL-R2010BK boasts a comprehensive array of ports, including digital coaxial and optical inputs, as well as analog RCA inputs. This versatility enables seamless integration with various audio sources, whether it be a computer, cassette player, or vinyl turntable. Furthermore, the unit includes both digital and analog outputs for easy connectivity to other audio equipment, such as amplifiers or mixing consoles.

The recorder also employs advanced technologies to enhance the recording process. The "Auto Level" feature automatically adjusts the recording levels to prevent distortion, ensuring a clean and balanced output. Additionally, the integrated "Track Increment" function allows users to easily insert track markers during recording, ideal for creating compilations or live recordings.

Another notable characteristic of the XL-R2010BK is its user-friendly LCD display, which provides clear feedback on recording status, remaining time, and other important information. The intuitive control layout allows users to navigate functions with ease, making it accessible for all skill levels.

In conclusion, the JVC XL-R2010BK is a premium CD-R/RW recorder that merges high-quality performance with essential features for an unparalleled recording experience. With its excellent audio fidelity, robust connectivity options, and advanced recording technologies, it stands out as an ideal choice for those looking to create high-quality audio recordings, whether for professional projects or personal use.
Top Page Image Contents